Enclosures and housings
B-2 Spirit Drone Wing
- Bounding box
- 57.4 × 163.8 × 10.0 mm
- Engine
- Precision B-rep
- Parameters
- 6
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
Generate a 3D CAD model of a B-2 Spirit style flying wing drone. The geometry must be based on a symmetric sketch on the Top Plane. Use the following specifications for one half of the wing (to be mirrored): Starting from the origin (0,0,0), draw a leading edge line at a 35-degree sweep angle with a length of 100mm. From that endpoint, draw a wingtip chord line. Draw a trailing edge line directed towards the central axis, with a length of 40mm. Close the sketch loop back to the origin. Extrude the resulting profile by 10mm to create a solid body. The final result should be a single, clean, manifold solid body ready for assembly in Onshape
Parameters
| Name | Value | Range |
|---|---|---|
| Sweep angle (°) | 35 deg | 10 – 60 |
| Leading edge length | 100 mm | 20 – 200 |
| Wingtip chord length | 45 mm | 5 – 100 |
| Wingtip chord angle (°) | -90 deg | -180 – 180 |
| Trailing edge length | 40 mm | 10 – 150 |
| Extrusion thickness | 10 mm | 1 – 30 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no