Brackets and mounts
Automotive Underbody Cover
- Bounding box
- 3200.0 × 780.0 × 84.0 mm
- Engine
- Precision B-rep
- Parameters
- 16
- Published
- November 17, 2026
Download
Free to download and use. See the terms.
The prompt
Automotive underbody cover CAD model, mm units. Thin formed panel, constant thickness 3.0 mm. Overall 3200 L × 780 W × 95 H. Tub cross-section: deck crown 1.5 mm, side walls bent 55° from horizontal, tub depth 72 mm, bottom radius 15 mm, side flanges 28 mm wide, bend radius 5 mm inner / 8 mm outer. Vertical mounting tabs 22×12×3 mm on flanges. Panels front→rear (X): 0–260 nose: rounded tip R18, width 520→700, side wings 140 mm with 4ר6.5 holes each; body holes Ø8 at (90,±120),(150,±180),(200,0). 260–920 forward deck: central rib H10 W8; Ø8 holes at (320,±200),(320,±120),(420,±240),(420,0),(520,±200),(520,±80),(640,±220),(640,±100),(640,0),(780,±200),(780,±120),(880,±180); Ø12 at (500,±60). 920–1320 transition: vertical ovals 55×150 at (1080,±95); long oval 110×45 at (1200,0); Ø8 at (980,±200),(980,±120),(1250,±180),(1250,0). 1320–2050 center bay: ovals 130×48 (1480,±130), 150×52 (1680,±145), 120×46 (1880,±110), 100×42 (1980,0); ribs Y=-90/0/+90 H10; cross ribs X=1450/1620/1780/1920 H11; Ø8 at (1360,±210),(1360,±140),(1550,±190),(1750,±60),(1900,±200),(2000,±150); Ø10 at (1700,0). 2050–2550 rear-mid: walls H14 at X=2120/2280/2440; ovals 115×44 (2180,±105), 95×40 (2380,0); Ø8 at (2080,±200),(2300,±170),(2480,±190),(2480,±90). 2550–3200 rear: width 800; ovals 125×50 (2700,±120), 140×52 (2950,0); Ø32 hole at (3050,+50); Ø8 at (2580,±210),(2580,±130),(2800,±200),(2800,±100),(3000,±180),(3100,±140),(3150,-40). All ovals and holes are true through-cuts. Side skirts depth 18 mm. Joint steps 6 mm with R5 fillets. Manifold shell, engineering gray, no logos. Export STEP + STL.
Parameters
| Name | Value | Range |
|---|---|---|
| Overall length | 3200 mm | 2000 – 4000 |
| Overall width | 780 mm | 600 – 1000 |
| Overall height | 95 mm | 60 – 150 |
| Panel thickness | 3 mm | 1.5 – 6 |
| Tub depth | 72 mm | 20 – 100 |
| Side wall angle from horizontal | 55 deg | 30 – 80 |
| Side flange width | 28 mm | 10 – 60 |
| Nose tip radius | 18 mm | 5 – 50 |
| Bottom corner radius | 15 mm | 2 – 40 |
| Flange bend radius | 8 mm | 1 – 20 |
| Side skirt depth | 18 mm | 5 – 40 |
| Joint step width | 6 mm | 2 – 20 |
| Joint step fillet radius | 5 mm | 0.5 – 10 |
| Mounting tab length | 22 mm | 8 – 50 |
| Mounting tab height | 12 mm | 4 – 30 |
| Mounting tab thickness | 3 mm | 1 – 8 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
JZX100 Gas Cap Holder
can you make a gas cap holder for a jzx100 chaser. i want you to refer to the image and make a cad very close to the picture
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
