Brackets and mounts
Automotive Bracket
- Bounding box
- 86.5 × 65.0 × 74.0 mm
- Engine
- Precision B-rep
- Parameters
- 22
- Published
- November 4, 2026
Download
Free to download and use. See the terms.
The prompt
Rebuild the entire model from scratch. The previous generated model was incorrect. Use the attached video and three hand-drawn orthographic views as the primary references. They show ONE real automotive mechanical bracket. IMPORTANT: This is an OPEN, CURVED, FORMED STRUCTURE, NOT a closed rectangular bracket. ACTUAL GEOMETRY 1. The main body has a curved U-shaped or saddle-like profile, with two raised ends and a recessed central section. 2. The body has thin formed walls with smooth curved transitions. 3. The side walls are inclined and curved, following the original part's shape. 4. One end has a mounting flange with a circular bolt hole. 5. The opposite end has a small mounting tab, also following the reference. 6. Preserve the open spaces between the structural walls. Do not fill them with solid rectangular blocks. 7. Reproduce the irregular curved silhouette visible when the original part is rotated in the video. 8. The part must look like a formed automotive bracket, not a generic triangular support. DIMENSIONS (mm) - Overall length: 75.5 - Overall width: approximately 35 - Overall height: approximately 74 - Additional measured dimensions: 33, 22.5, 39, 34, 52, 55, 68 and 4 mm. - Preserve these dimensions where their positions match the reference drawings. STRICT RESTRICTIONS - NO floating rectangular bars. - NO arbitrary large rectangular side openings. - NO triangular bridge structure. - NO invented decorative details. - NO rectangular block construction. - Do not close the U-shaped central cavity. FINAL MODEL Create one coherent mechanical component with the correct curved, open geometry and mounting features. Use editable CAD geometry and export as STEP (.step). Prioritize matching the actual physical object shown in the video over visual simplification.
Parameters
| Name | Value | Range |
|---|---|---|
| Overall Length | 75.5 mm | 50 – 120 |
| Overall Height | 74 mm | 40 – 120 |
| Main Width | 35 mm | 20 – 80 |
| Upper Width | 33 mm | 15 – 60 |
| Vertical Section Height | 55 mm | 20 – 100 |
| Internal Dimension | 52 mm | 20 – 100 |
| Lower Section | 34 mm | 10 – 80 |
| Small Upper Detail | 5 mm | 1 – 15 |
| Opposite Side Height | 39 mm | 10 – 80 |
| Opposite Side Internal Dimension | 23 mm | 10 – 50 |
| Additional Dimension | 22.5 mm | 5 – 70 |
| Unconfirmed 68 mm | 68 mm | 10 – 100 |
| Hole Diameter | 4 mm | 1 – 12 |
| Lower Section Height | 31 mm | 10 – 70 |
| Fillet Radius | 1.5 mm | 0 – 8 |
| Wall Thickness | 4 mm | 1 – 15 |
| Flange Thickness | 6 mm | 2 – 15 |
| Flange Width | 25 mm | 10 – 60 |
| Flange Height | 30 mm | 10 – 80 |
| Tab Thickness | 5 mm | 2 – 15 |
| Tab Width | 22 mm | 8 – 50 |
| Tab Height | 18 mm | 8 – 50 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o