Enclosures and housings
Automatic Railway Level Crossing Gate System
- Bounding box
- 900 × 525 × 186 mm
- Engine
- 3D Printing B-rep
- Parameters
- 63
- Published
- November 21, 2026
Download
Free to download and use. See the terms.
The prompt
Design a 3D CAD model of an Automatic Railway Level Crossing Gate System for a college engineering project. Requirements: 1. A rectangular base platform. 2. Two parallel railway tracks with evenly spaced sleepers. 3. A road crossing the railway tracks at 90 degrees. 4. Two automatic barrier gates on opposite sides of the railway crossing. 5. Vertical support pillars for the barriers. 6. Rotating barrier arms connected to servo motor housings. 7. A small train positioned on the railway tracks. 8. Warning signal poles with red LED housing. 9. A control box near the railway crossing. Design should be compact, realistic, mechanically understandable, and suitable for a physical working model. Use separate components wherever possible so they can be assembled and modified independently.
Parameters
| Name | Value | Range |
|---|---|---|
| Base length X | 600 mm | 200 – 1000 |
| Base width Y | 350 mm | 100 – 600 |
| Base thickness | 12 mm | 4 – 40 |
| Rail length X | 600 mm | 200 – 1000 |
| Distance between rail centres | 90 mm | 30 – 200 |
| Rail width | 6 mm | 2 – 20 |
| Rail height | 8 mm | 2 – 30 |
| Number of sleepers | 12 mm | 2 – 40 |
| Sleeper length Y | 140 mm | 50 – 300 |
| Sleeper width X | 18 mm | 6 – 60 |
| Sleeper height | 6 mm | 2 – 20 |
| Sleeper pitch | 45 mm | 10 – 100 |
| Road width across tracks X | 100 mm | 50 – 250 |
| Road length Y | 350 mm | 100 – 600 |
| Road thickness | 6 mm | 2 – 20 |
| Rail slot clearance per side | 1 mm | 0.2 – 5 |
| Slot over-cut at road edges | 4 mm | 0 – 20 |
| Pillar square size | 20 mm | 10 – 60 |
| Pillar height | 140 mm | 50 – 300 |
| Pillar foot size | 30 mm | 15 – 80 |
| Pillar foot height | 4 mm | 1 – 15 |
| Servo housing width/depth | 30 mm | 15 – 80 |
| Servo housing height | 25 mm | 10 – 80 |
| Servo shaft diameter | 6 mm | 3 – 20 |
| Servo shaft length | 10 mm | 2 – 30 |
| Barrier arm length | 140 mm | 50 – 300 |
| Barrier arm width Y | 12 mm | 6 – 30 |
| Barrier arm thickness Z | 8 mm | 3 – 20 |
| Pivot boss diameter | 18 mm | 8 – 40 |
| Pivot boss height | 16 mm | 6 – 40 |
| Number of stripe grooves | 5 mm | 2 – 12 |
| Stripe groove depth | 0.8 mm | 0.4 – 3 |
| Barrier arm height above base | 150 mm | 50 – 300 |
| North pillar X | -70 mm | -250 – 250 |
| North pillar Y | 150 mm | 0 – 170 |
| South pillar X | 70 mm | -250 – 250 |
| South pillar Y | -150 mm | -170 – 0 |
| Train X position | -120 mm | -280 – 280 |
| Train Y position | 0 mm | -120 – 120 |
| Train length X | 120 mm | 50 – 300 |
| Train body width Y | 55 mm | 20 – 150 |
| Train height | 65 mm | 30 – 150 |
| Wheel diameter | 18 mm | 8 – 40 |
| Wheel width | 6 mm | 2 – 20 |
| Distance between axles | 70 mm | 20 – 200 |
| Signal pole X offset | 80 mm | 10 – 280 |
| Signal pole Y offset | 150 mm | 10 – 175 |
| Signal pole diameter | 15 mm | 5 – 40 |
| Signal pole height | 120 mm | 50 – 300 |
| LED housing width X | 30 mm | 10 – 80 |
| LED housing depth Y | 30 mm | 10 – 80 |
| LED housing height | 20 mm | 8 – 60 |
| Red lens diameter | 18 mm | 5 – 40 |
| Signal base plate diameter | 30 mm | 10 – 60 |
| Signal base plate height | 4 mm | 1 – 20 |
| Control box X position | 130 mm | -250 – 250 |
| Control box Y position | 145 mm | -160 – 160 |
| Control box length X | 70 mm | 30 – 150 |
| Control box width Y | 50 mm | 20 – 120 |
| Control box height | 45 mm | 20 – 120 |
| Raised panel thickness | 2 mm | 1.2 – 6 |
| Button diameter | 8 mm | 3 – 20 |
| LED diameter | 4 mm | 2 – 10 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Lego 1x4 Technic Brick
Create a precise 3D CAD model of a single 1x4 Lego Technic-compatible brick designed for STEM robotics. The main rectangular body must have exact dimensions: 31.8 mm in length, 7.8
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Oval Safety Snap Carabiner
Create a simple alloy steel safety snap carabiner for me to download to solidworks. I should be able to link it to a ring of another part in solidworks.
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
