Brackets and mounts
Automated Smart Pill Dispenser
- Bounding box
- 100 × 100 × 98.7 mm
- Engine
- 3D Printing B-rep
- Parameters
- 24
- Published
- November 4, 2026
Download
Free to download and use. See the terms.
The prompt
Project Name: Automated Smart Pill Dispenser (4-Compartment Medical Assistant) Description: A multi-part parametric mechanical assembly designed for 3D printing. It features a motorized 4-compartment internal carousel housed within a transparent outer cylinder, driven by a stepper motor seated in a custom green foundation base, and topped with a fixed red lid equipped with an active, hinged pink dispensing hatch. Objective: Generate a precise, multi-part parametric 3D CAD assembly based on the attached design, incorporating specific mechanical motion controls and open-base architecture. 1. Foundation Base (Solid Green): A solid green bottom plate serving as the primary structural foundation. Features a custom-molded internal pocket precisely dimensioned to securely house and lock a 28BYJ-48 stepper motor. 2. Outer Housing (Transparent Blue Cylinder): A clear, transparent outer cylindrical shell mounted directly on top of the green base. Bottom Cutout/Opening: The lower base of this blue cylinder features a defined viewing/dispensing opening that aligns with and showcases the bottom design profile of the inner red carousel. 3. Inner Carousel (Red with 4 Compartments): A 4-compartment rotating carousel positioned inside the transparent outer cylinder. Connected to the central motor shaft at the bottom. Motion Control: Must include an active rotational joint/constraint allowing the inner red carousel to rotate smoothly in both directions. 4. Top Lid Assembly (Red Disc & Pink Hinged Hatch): A flat red circular ring resting on the top rim of the outer cylinder. Hinged Hatch Control: A single pie-slice section colored pink is integrated with a working hinge mechanism. This pink hatch must have an angular motion control constraint allowing it to pivot and open vertically upward, while the remaining red portion stays completely fixed. It's must be pivoted at the center as shown in the image and not at the side.
Parameters
| Name | Value | Range |
|---|---|---|
| Base plate diameter | 100 mm | 60 – 160 |
| Base plate thickness | 20 mm | 8 – 40 |
| Motor pocket width | 30 mm | 22 – 45 |
| Motor pocket depth | 16 mm | 6 – 36 |
| Motor shaft clearance | 6.2 mm | 4 – 10 |
| Motor boss relief diameter | 12 mm | 6 – 20 |
| Housing outer diameter | 90 mm | 50 – 140 |
| Housing wall thickness | 3 mm | 1.2 – 6 |
| Housing height | 70 mm | 30 – 140 |
| Dispensing window angle | 100 deg | 20 – 180 |
| Dispensing window height | 26 mm | 10 – 60 |
| Carousel outer diameter | 78 mm | 40 – 130 |
| Carousel height | 58 mm | 20 – 130 |
| Carousel wall thickness | 2.5 mm | 1.2 – 6 |
| Divider wall thickness | 2 mm | 1.2 – 5 |
| Hub diameter | 16 mm | 8 – 30 |
| Hub height | 14 mm | 6 – 30 |
| Shaft bore diameter | 5.2 mm | 3 – 8 |
| Lid outer diameter | 96 mm | 60 – 170 |
| Lid inner opening | 76 mm | 30 – 130 |
| Lid thickness | 4 mm | 2 – 8 |
| Hatch pie angle | 90 deg | 20 – 180 |
| Hinge barrel radius | 1.7 mm | 1 – 4 |
| Hinge axis height above lid | 3 mm | 1 – 10 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o