Enclosures and housings
Attic Alcove Fitted Wardrobe with Beam Notch
- Bounding box
- 1036.0 × 2452.9 × 2085.0 mm
- Engine
- Precision B-rep
- Parameters
- 20
- Published
- August 7, 2026
Download
Free to download and use. See the terms.
The prompt
I'm building a fitted MDF wardrobe into an attic alcove. Design it and give me a full cut list and dimensioned drawings. SPACE (all cm, measured on site): - Knee wall height (left, vertical): 129 - Sloped ceiling run: 163, at 26° - Upper section: 56 and 53, with a 27° angle at the top right - There is a boxed-in beam/upstand at the top right — dimensions 14 on the left side 11.5 wide then 9 back up, its' angles the angles are 23 24 and 26 respectivly - Walls are plastered and NOT square/plumb — assume ±10mm variance BUILD: - 18mm MDF throughout - Joinery: [butt joints with confirmat screws / dowels / pocket holes] - Sheet size 2440x1220 - Scribe fillets against walls and ceiling, not the carcass itself I NEED: 1. Panel-by-panel cut list: part name, qty, length x width, any angled cut with the mitre/bevel angle stated in degrees 2. Assembly order 3. Sheet nesting layout for 2440x1220 with 3mm kerf allowance 4. Dimensioned front elevation and side section Constraints: hanging rail must have 50cm clear depth and at least 100cm drop. Flag anywhere the roof slope makes a section unusable and suggest what to put there instead (drawers/shelves).
Parameters
| Name | Value | Range |
|---|---|---|
| Side Thickness | 18 mm | 12 – 30 |
| Internal Width (across) | 1000 mm | 500 – 3000 |
| Depth (slope horizontal run) | 1630 mm | 500 – 3000 |
| Knee Wall Height (front) | 1290 mm | 500 – 2500 |
| Back Height (derived from slope) | 2085 mm | 1000 – 4000 |
| Back Thickness | 18 mm | 12 – 30 |
| Bottom Thickness | 18 mm | 12 – 30 |
| Top Thickness | 18 mm | 12 – 30 |
| Shelf Thickness | 18 mm | 12 – 30 |
| Shelf Height (from floor) | 600 mm | 100 – 2000 |
| Door Thickness | 18 mm | 12 – 30 |
| Door Width (each) | 500 mm | 200 – 1500 |
| Door Height (vertical) | 1285 mm | 500 – 2500 |
| Hanging Rail Diameter | 25 mm | 10 – 50 |
| Rail Length (span) | 1000 mm | 200 – 2500 |
| Rail Height (from floor) | 1000 mm | 500 – 2000 |
| Rail Y Position (front=0) | 520 mm | 100 – 1500 |
| Beam Notch Width (X) | 140 mm | 0 – 500 |
| Beam Notch Depth (Y) | 115 mm | 0 – 500 |
| Beam Notch Height (Z) | 90 mm | 0 – 500 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Spur Gearbox
design gearbox