Brackets and mounts
Atomberg Remote Wall Holder
- Bounding box
- 82.8 × 27 × 105 mm
- Engine
- 3D Printing B-rep
- Parameters
- 15
- Published
- November 20, 2026
Download
Free to download and use. See the terms.
The prompt
I need holder for atomberg remote that can be hanged or fixed on wall
Parameters
| Name | Value | Range |
|---|---|---|
| Remote width | 50 mm | 30 – 100 |
| Remote thickness | 18 mm | 8 – 40 |
| Remote height | 130 mm | 60 – 250 |
| Slide clearance per side | 0.4 mm | 0.2 – 1.5 |
| Back plate thickness | 3 mm | 2 – 6 |
| Side wall thickness | 3 mm | 2 – 8 |
| Bottom shelf thickness | 4 mm | 2 – 10 |
| Pocket depth in front of plate | 24 mm | 14 – 50 |
| Pocket (side wall) height | 90 mm | 40 – 200 |
| Front lip height above shelf | 8 mm | 3 – 25 |
| Plate margin above pocket | 15 mm | 8 – 40 |
| Mounting ear width | 13 mm | 10 – 30 |
| Keyhole head diameter | 7.5 mm | 5 – 12 |
| Keyhole slot width | 4 mm | 3 – 8 |
| Keyhole slot length | 8 mm | 3 – 20 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
JZX100 Gas Cap Holder
can you make a gas cap holder for a jzx100 chaser. i want you to refer to the image and make a cad very close to the picture
Micro RC Airplane Frame
Create a lightweight 3D-printable indoor micro RC airplane frame. The fuselage is a hollow rectangular boom 200 mm long, 3 mm wide, and 3 mm tall, with an open U-shaped electronics
