Enclosures and housings
Assembled Reservoir with R1 Tube
- Bounding box
- 120.0 × 70.0 × 180.0 mm
- Engine
- Precision B-rep
- Parameters
- 17
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
Create a new parametric CAD model from zero. Units: mm. IMPORTANT: The generated script MUST define exactly one top-level function: build(params) All CAD geometry must be created inside build(params). Do not place executable CAD code outside build(params). Create: 1. One open-top reservoir. Outer solid: extrude along X from 0 to 120 using this closed YZ profile: (0,0) (20,0) (22,100) (70,180) (0,180) Subtract one cavity: X = 3 to 117 Inner YZ profile: (3,4) (17.08,4) (19,100) (67,180) (3,180) Final reservoir bounding box: 120 x 70 x 180 mm. 2. Two rounded slots through front wall Y=0 to Y=3. Both: width 103 height 3.8 center X=60 end radius 1.9 Lower center Z=132. Upper center Z=148. Lower slot internal opening at Y=3: width 106 height 6.8 center X=60 center Z=132 end radius 3.4 Create a smooth transition from the lower external slot to its internal opening. 3. Create R1 as a separate solid. R1: axis parallel X diameter 8 length 106 through bore diameter 3.4 X=7 to 113 axis Y=10.14 axis Z=14 Final model must contain exactly 2 solids: reservoir R1 Do not add any other geometry.
Parameters
| Name | Value | Range |
|---|---|---|
| Reservoir length X | 120 mm | 50 – 200 |
| Cavity start X | 3 mm | 0.5 – 10 |
| Cavity length X | 114 mm | 20 – 190 |
| Front wall thickness Y | 3 mm | 1 – 8 |
| Slot center X | 60 mm | 10 – 110 |
| External slot width | 103 mm | 40 – 115 |
| External slot height | 3.8 mm | 1 – 10 |
| Lower slot center Z | 132 mm | 100 – 170 |
| Upper slot center Z | 148 mm | 110 – 175 |
| Lower internal opening width | 106 mm | 45 – 118 |
| Lower internal opening height | 6.8 mm | 1 – 12 |
| R1 outside diameter | 8 mm | 3 – 20 |
| R1 through bore diameter | 3.4 mm | 0.5 – 18 |
| R1 length | 106 mm | 20 – 120 |
| R1 start X | 7 mm | 0 – 20 |
| R1 axis Y | 10.14 mm | 5 – 20 |
| R1 axis Z | 14 mm | 5 – 30 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no