Enclosures and housings
Assembled Enclosure with Hinge and Magnetic Closure
- Bounding box
- 300.0 × 203.5 × 35.0 mm
- Engine
- Precision B-rep
- Parameters
- 11
- Published
- August 8, 2026
Download
Free to download and use. See the terms.
The prompt
Now add a full length piano hinge along the entire rear long edge (300mm side) of the case. The hinge connects the base tray and the lid. Hinge specifications: knuckle diameter 4mm, each leaf 8mm wide, hinge sits flush with the exterior rear edge profile — does not protrude beyond the body outline. The hinge runs the full 300mm length continuously. Also add two magnetic closure pockets on the front long edge — one in the lid front edge and one in the base front edge, directly opposite each other. Each pocket is 10mm diameter, 3mm deep, centered on the front edge, positioned 75mm from center in each direction (150mm apart total). The pockets are recessed flush into the mating surfaces with no visible external hardware."
Parameters
| Name | Value | Range |
|---|---|---|
| Case Length | 300 mm | 50 – 1000 |
| Case Width | 200 mm | 50 – 500 |
| Base Tray Depth | 20 mm | 5 – 100 |
| Lid Depth | 15 mm | 5 – 100 |
| Wall Thickness | 3 mm | 1 – 10 |
| Magnet Diameter | 10 mm | 2 – 30 |
| Magnet Thickness | 3 mm | 0.5 – 10 |
| Magnet Offset from Center | 75 mm | 10 – 200 |
| Hinge Knuckle Diameter | 4 mm | 1 – 10 |
| Leaf Width (height) | 8 mm | 2 – 30 |
| Leaf Thickness | 1.5 mm | 0.5 – 5 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Spur Gearbox
design gearbox