Brackets and mounts
Assembled 450 mm Trainer Aircraft
- Bounding box
- 286.3 × 456.3 × 91.1 mm
- Engine
- Precision B-rep
- Parameters
- 19
- Published
- November 18, 2026
Download
Free to download and use. See the terms.
The prompt
Create a compact, lightweight, 3D-printable conventional fixed-wing aircraft closely matching the attached reference image. Make it a complete, proportionate aircraft with all components properly connected, NOT separate floating parts. **Dimensions:** - Wingspan: 450 mm - Fuselage length: 280 mm, with a clearly visible, continuous central body. - Main wing chord: 80 mm, positioned centrally on the fuselage. - Horizontal stabilizer: 140 mm span × 35 mm chord. - Vertical stabilizer: 60 mm height × 35 mm length. - Main wing: straight, symmetrical, with 5° dihedral. **Design requirements:** - Slender but substantial fuselage extending from nose to tail. - Main wing firmly attached across the middle of the fuselage. - Horizontal and vertical stabilizers attached at the rear. - Smooth aerodynamic transitions and realistic aircraft proportions. - Reinforced mounting provision at the CG for a horizontal pivot shaft parallel to the wingspan. - Lightweight hollow construction suitable for 3D printing. Generate one fully assembled aircraft with connected geometry, realistic proportions and no unnecessary gaps. Provide editable STEP and STL files for Fusion 360.
Parameters
| Name | Value | Range |
|---|---|---|
| Fuselage Length | 280 mm | 200 – 400 |
| Fuselage Width | 30 mm | 20 – 50 |
| Fuselage Height | 35 mm | 25 – 60 |
| Fuselage Wall | 1.5 mm | 0.8 – 3 |
| Wing Span | 450 mm | 300 – 600 |
| Wing Chord | 80 mm | 50 – 120 |
| Wing Thickness | 8 mm | 4 – 16 |
| Wing Dihedral | 5 deg | 0 – 15 |
| Wing Tip Radius | 3 mm | 0.5 – 6 |
| Horizontal Stabilizer Span | 140 mm | 80 – 220 |
| Horizontal Stabilizer Chord | 35 mm | 20 – 60 |
| Horizontal Stabilizer Thickness | 4 mm | 2 – 10 |
| Horizontal Stabilizer Tip Radius | 2 mm | 0.5 – 4 |
| Vertical Stabilizer Height | 60 mm | 30 – 100 |
| Vertical Stabilizer Length | 35 mm | 20 – 60 |
| Vertical Stabilizer Thickness | 4 mm | 2 – 10 |
| Pivot Sleeve OD | 8 mm | 4 – 16 |
| Pivot Sleeve Length | 120 mm | 60 – 200 |
| Pivot Sleeve Bore | 4 mm | 2 – 10 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
JZX100 Gas Cap Holder
can you make a gas cap holder for a jzx100 chaser. i want you to refer to the image and make a cad very close to the picture
Micro RC Airplane Frame
Create a lightweight 3D-printable indoor micro RC airplane frame. The fuselage is a hollow rectangular boom 200 mm long, 3 mm wide, and 3 mm tall, with an open U-shaped electronics
