Brackets and mounts
AS5600 Rotary Encoder Housing Assembly
- Bounding box
- 40.2 × 40.2 × 28.0 mm
- Engine
- Precision B-rep
- Parameters
- 24
- Published
- November 4, 2026
Download
Free to download and use. See the terms.
The prompt
Generate a parametric 3-part 3D-printable rotary encoder housing assembly for an AS5600 sensor mounting to a DC motor. Part 1: The Rotor. Create a cylinder with a 7mm outer diameter and 6mm height. On the top face, cut a centered pocket 4.1mm in diameter and 2mm deep to hold a circular magnet. On the bottom face, cut a centered hole [INSERT MOTOR SHAFT DIAMETER + 0.2mm] in diameter and 4mm deep to press-fit onto a metal motor shaft. Part 2: The Stator. Create a circular base plate with an outer diameter of [INSERT MOTOR OUTER DIAMETER] and a thickness of 3mm. Extrude the outer perimeter upwards by 15mm with a 2mm wall thickness to form a cup. Inside the cup, generate four cylindrical standoffs centered around the origin, arranged in a 17.0mm by 17.0mm square pattern. Each standoff must have a 5mm outer diameter and a 2.8mm central hole for self-tapping M3 screws. Set the height of these standoffs so that a 1.6mm thick PCB mounted on top will sit exactly 1.5mm above the Rotor's magnet. Cut two mounting holes through the base plate with a center-to-center spacing of [INSERT MOTOR MOUNTING HOLE SPACING] to attach to the motor. Part 3: The Cover. Create a cylindrical cap with an inner diameter matching the Stator's outer diameter, plus a 0.2mm tolerance for a friction fit. The cap should have a 2mm wall thickness and an 8mm internal depth. Cut a rectangular slot 10mm wide by 3mm high through one of the side walls to serve as a wire exit for a 4-pin I2C cable.
Parameters
| Name | Value | Range |
|---|---|---|
| Motor shaft diameter | 3 mm | 1 – 8 |
| Stator base plate OD (= motor OD) | 36 mm | 20 – 60 |
| Base plate thickness | 3 mm | 1 – 8 |
| Cup wall height | 15 mm | 5 – 30 |
| Cup wall thickness | 2 mm | 1 – 5 |
| Standoff outer diameter | 5 mm | 3 – 8 |
| Standoff central hole diameter | 2.8 mm | 1 – 5 |
| Standoff square spacing | 17 mm | 10 – 30 |
| Stator center hole diameter | 5 mm | 2 – 10 |
| Mounting hole spacing | 25 mm | 10 – 50 |
| Mounting hole diameter | 3.2 mm | 1 – 6 |
| Rotor outer diameter | 7 mm | 4 – 12 |
| Rotor height | 6 mm | 2 – 15 |
| Magnet pocket diameter | 4.1 mm | 2 – 6 |
| Magnet pocket depth | 2 mm | 0.5 – 4 |
| Rotor shaft bore diameter (press fit) | 3.2 mm | 1 – 6 |
| Rotor shaft bore depth | 4 mm | 1 – 8 |
| Cover wall thickness | 2 mm | 1 – 5 |
| Cover internal depth | 8 mm | 4 – 20 |
| Cover inner diameter (friction fit) | 36.2 mm | 20 – 60 |
| Wire exit slot width | 10 mm | 5 – 20 |
| Wire exit slot height | 3 mm | 1 – 8 |
| PCB thickness | 1.6 mm | 0.5 – 3 |
| Magnet to PCB gap | 1.5 mm | 0.5 – 5 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o