Enclosures and housings
Arduino Uno R4 WiFi Enclosure with Sliding Lid
- Bounding box
- 80.0 × 55.0 × 35.0 mm
- Engine
- Precision B-rep
- Parameters
- 17
- Published
- August 18, 2026
Download
Free to download and use. See the terms.
The prompt
Design a parametric 3D-printable protective enclosure and sliding lid for an Arduino Uno R4 WiFi with an overall external dimension of 80mm length, 55mm width, and 35mm total height. Key specifications: 1. Main Base: An outer box measuring 80mm x 55mm with a height of 30mm (leaving 5mm for the lid), with a uniform wall thickness of 2.5mm and an open top. 2. Sliding Lid Tracks: Add internal horizontal guide grooves or a stepped recess along the inner top rim of the side walls with a 0.4mm tolerance to allow a slide-in lid. 3. Sliding Lid: A separate matching flat plate lid measuring 80mm length, 55mm width, and 5mm height that fits cleanly into the top tracks to close the case. 4. Cutouts: Include a front panel cutout for the USB-C port and barrel jack, and a 10mm x 10mm wire passthrough cutout on the back panel.
Parameters
| Name | Value | Range |
|---|---|---|
| Base length (X) | 80 mm | 50 – 120 |
| Base width (Y) | 55 mm | 30 – 100 |
| Base height (Z) | 30 mm | 15 – 60 |
| Wall thickness | 2.5 mm | 2.5 – 5 |
| Lid thickness | 5 mm | 2 – 8 |
| Track clearance | 0.4 mm | 0.2 – 1 |
| Track rebate depth | 1.25 mm | 0.5 – 2 |
| USB-C cutout width | 9 mm | 6 – 14 |
| USB-C cutout height | 3.5 mm | 2 – 6 |
| USB-C X position | -15 mm | -30 – 30 |
| USB-C Z position | 8 mm | 3 – 20 |
| Barrel jack diameter | 8.5 mm | 6 – 14 |
| Barrel jack X position | 15 mm | -30 – 30 |
| Barrel jack Z position | 8 mm | 3 – 20 |
| Rear passthrough size | 10 mm | 5 – 20 |
| Rear passthrough X position | 0 mm | -30 – 30 |
| Rear passthrough Z position | 10 mm | 3 – 20 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Spur Gearbox
design gearbox