Enclosures and housings
Arduino Uno Enclosure Assembly
- Bounding box
- 120.0 × 90.0 × 35.0 mm
- Engine
- Precision B-rep
- Parameters
- 26
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
Case for arduino uno with card reader display and two buttons
Parameters
| Name | Value | Range |
|---|---|---|
| Shell Length | 120 mm | 100 – 160 |
| Shell Width | 90 mm | 70 – 120 |
| Shell Height | 25 mm | 15 – 40 |
| Wall Thickness | 2.5 mm | 1.5 – 5 |
| Mounting Post Diameter | 8 mm | 5 – 12 |
| Post Screw Hole Diameter | 3.2 mm | 2 – 5 |
| Vent Slot Width | 2 mm | 1 – 4 |
| Vent Slot Height | 10 mm | 5 – 18 |
| Lid Thickness | 5 mm | 3 – 8 |
| Display Cutout Width | 46 mm | 30 – 60 |
| Display Cutout Height | 26 mm | 15 – 40 |
| Button Hole Diameter | 12 mm | 8 – 16 |
| Card Slot Width | 15 mm | 10 – 25 |
| Card Slot Height | 4 mm | 2 – 8 |
| Arduino PCB Length | 68.6 mm | 60 – 80 |
| Arduino PCB Width | 53.4 mm | 45 – 65 |
| Arduino PCB Thickness | 1.6 mm | 1 – 3 |
| Card Reader Length | 40 mm | 30 – 55 |
| Card Reader Width | 28 mm | 20 – 40 |
| Card Reader Thickness | 8 mm | 4 – 14 |
| Display Module Length | 50 mm | 35 – 65 |
| Display Module Width | 30 mm | 20 – 45 |
| Display Module Thickness | 8 mm | 4 – 14 |
| Button Cap Diameter | 11.5 mm | 8 – 14 |
| Button Total Height | 15 mm | 10 – 22 |
| Button Spacing (center to center) | 28 mm | 18 – 45 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no