AR HUD Smart-Glasses Front Frame with Temples

Step 1 (Base Face Extrusion): Select the Front Plane (XY), draw the outer bounding profile at 144.00 mm Width × 48.00 mm Height, and execute a Boss-Extrude forward to a thickness of 14.00 mm. Step 2 (The 60/40 Split & Optical Angle): Create a horizontal reference line exactly 19.20 mm up from the bottom of the lens profile to lock in the 40% HUD area. Select the Right Plane (YZ) and use the Cut-Extrude tool to slice the interior shelf at an angle of exactly 45.00°. Step 3 (Electronics Packaging Cavities): Select the top face of the frame brow and perform a vertical Cut-Extrude down by 18.40 mm to create the 26.70 mm × 7.70 mm pocket for the Sony Micro-OLED. Cut the 5.50 mm square IMU pocket down by 6.00 mm at the exact center of the bridge. Step 4 (Prescription Lens Track & Wire Runways): Route a continuous 2.50 mm wide × 2.00 mm deep internal wire channel through the brow structure. Create a reference plane offset 1.50 mm behind the prism face and cut the circular 1.20 mm wide × 0.80 mm deep Rx insert groove right into the inner rim walls. Step 5 (Balanced Battery Tails): Sweep the temple arms to a length of 152.00 mm on the side plane, and pocket-cut the internal 12.50 mm × 38.00 mm × 5.50 mm capsule slot directly into the ear tips.

Parameters

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.