Brackets and mounts
AQUASIGNAL Water Sensing Chamber
- Bounding box
- 138.7 × 89 × 89 mm
- Engine
- 3D Printing B-rep
- Parameters
- 28
- Published
- November 4, 2026
Download
Free to download and use. See the terms.
The prompt
Create a precise mechanical 3D CAD model of the MAIN WATER SENSING CHAMBER for a product called AQUASIGNAL. The component is a transparent inline water flow chamber used for four-parameter water quality monitoring. DESIGN TYPE: Hollow cylindrical mechanical flow chamber with multiple sensor mounting ports. DIMENSIONS: - Overall length: 140 mm. - External diameter: 65 mm. - Internal cylindrical water passage: 35 mm diameter. - Nominal chamber wall thickness: 5 mm. - Horizontal central water-flow axis. MAIN BODY: - Create a hollow cylindrical chamber. - Maintain a continuous internal water passage. - Both ends must remain open for separate inlet and outlet connectors. - Create circular end faces suitable for removable end caps. - Add smooth internal transitions. - Add external fillets to avoid sharp edges. SENSOR MOUNTING PORTS: 1. EC/TDS mounting port: - Located on the upper surface. - Threaded mounting boss. - Opening diameter: 12 mm. - Suitable for a cylindrical conductivity probe. 2. pH mounting port: - Located separately on the upper surface. - Opening diameter: 12 mm. - Suitable for a cylindrical pH probe. 3. TURBIDITY emitter mounting port: - Located on one side of the chamber. - Include a sealed optical window mounting interface. 4. TURBIDITY receiver mounting port: - Located opposite the emitter at approximately 90 degrees to the water-flow direction. - Include a separate optical window mounting interface. 5. TEMPERATURE mounting port: - Located on the upper/rear surface. - Opening diameter: 8 mm. - Suitable for a waterproof temperature probe. ADDITIONAL FEATURES: - Two external mounting brackets at the bottom. - Four mounting holes for attachment to a supporting frame. - Separate sealing grooves around sensor ports. - Removable end-cap mounting interfaces. - External engraved labels: EC, PH, TURBIDITY and TEMP. MATERIAL AND APPEARANCE: - Transparent polymer appearance. - Clean industrial finish. - Realistic mechanical geometry. - Visible internal water passage. - Suitable for engineering presentation. CAD REQUIREMENTS: - Generate an editable solid CAD part. - Preserve the hollow internal geometry. - Do not merge the sensor probes into the chamber. - Do not generate a decorative rendering instead of solid geometry. - Keep all dimensions in millimetres. This is a conceptual bench prototype, not a pressure-rated or validated water-contact component.
Parameters
| Name | Value | Range |
|---|---|---|
| Overall length along flow axis | 140 mm | 60 – 300 |
| Outside diameter | 65 mm | 30 – 120 |
| Internal water passage diameter | 35 mm | 15 – 80 |
| Nominal wall / end cap seat depth | 5 mm | 3 – 12 |
| End cap spigot bore diameter | 55 mm | 25 – 110 |
| Internal conical transition length | 7 mm | 1 – 25 |
| EC / pH boss offset from centre | 40 mm | 15 – 65 |
| EC and pH probe bore diameter | 12 mm | 5 – 20 |
| EC and pH boss diameter | 26 mm | 14 – 40 |
| Temperature probe bore diameter | 8 mm | 4 – 16 |
| Temperature boss diameter | 22 mm | 12 – 34 |
| Temperature port angle from top | 45 deg | 10 – 80 |
| Turbidity optical bore diameter | 10 mm | 4 – 20 |
| Turbidity boss diameter | 26 mm | 14 – 40 |
| Optical window seat diameter | 20 mm | 10 – 34 |
| Optical window seat depth | 4 mm | 1 – 10 |
| Boss height above body | 12 mm | 4 – 30 |
| Bracket plate height | 14 mm | 6 – 40 |
| Bracket width along flow axis | 16 mm | 8 – 40 |
| Bracket length across body | 76 mm | 40 – 140 |
| Bracket offset from centre | 45 mm | 10 – 65 |
| Bracket / body overlap | 2 mm | 0.5 – 6 |
| Frame bolt hole diameter | 4.5 mm | 2 – 10 |
| Bolt hole offset across body | 30 mm | 10 – 60 |
| Seal groove depth | 1.5 mm | 0.6 – 4 |
| Seal groove width | 3 mm | 1.5 – 8 |
| Engraving cut depth | 4.5 mm | 1 – 8 |
| Engraving text height | 6 mm | 3 – 12 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o