Enclosures and housings
Aquarium Glass Cover Cable Insert
- Bounding box
- 18.7 × 16.7 × 8.2 mm
- Engine
- 3D Printing B-rep
- Parameters
- 10
- Published
- November 5, 2026
Download
Free to download and use. See the terms.
The prompt
Create a single-piece, 3D-printable PETG insert for an open-edge cutout in a 5 mm thick aquarium glass cover. * Cutout: 15 × 15 mm, with 0.3 mm rounded inner corners. * Central body: 14.7 × 14.7 × 5.2 mm, fitting inside the cutout. * Top and bottom flanges: 1.5 mm thick, extending 2 mm beyond the central body onto the glass. * The flanges form a groove that allows the insert to slide horizontally onto the glass from its open edge. * Add a 5 × 5 mm cable passage at the open outer edge of the insert for a thin power cable. * Minimalist design, smooth edges, no screws or glue. * Must be one rigid piece, printable in PETG on a Bambu Lab H2C. Generate a dimensionally accurate STL model.
Parameters
| Name | Value | Range |
|---|---|---|
| Glass cover thickness | 5 mm | 3 – 10 |
| Square cutout side | 15 mm | 10 – 40 |
| Cutout inner corner radius | 0.3 mm | 0.1 – 1 |
| Per-side sliding clearance | 0.15 mm | 0.05 – 0.4 |
| Vertical groove clearance over glass | 0.2 mm | 0.1 – 1 |
| Flange overhang onto glass | 2 mm | 1 – 5 |
| Flange thickness | 1.5 mm | 1 – 4 |
| Flange edge rounding | 0.6 mm | 0.2 – 0.7 |
| Cable passage width at open edge | 5 mm | 2 – 10 |
| Cable passage depth from open edge | 5 mm | 2 – 10 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Default Spur Gear
La costruzione dovrà prevedere i seguenti spazi: 1. Zona Giorno (Piano Terra)-Totale:~110 mg • Ingresso / Disimpegno con guardaroba: 10 mg • Soggiorno / Area Living: 40 mq (ampio,