Brackets and mounts
Apple TV Remote Wall Cradle
- Bounding box
- 43.8 × 80 × 20.8 mm
- Engine
- 3D Printing B-rep
- Parameters
- 11
- Published
- November 16, 2026
Download
Free to download and use. See the terms.
The prompt
Create a 3D-printable adhesive wall-mounted holder for an Apple TV remote in a silicone case. The holder should be mounted flat against a cabinet or wall using double-sided adhesive tape. The back must be flat and suitable for adhesive mounting. Remote dimensions including silicone case: - height: 138 mm - width: 37 mm - thickness: 13.8 mm Required internal dimensions: - internal width: 38.2 mm - internal depth: 15.0 mm Design style: - slim vertical cradle - open top - partially open front - bottom support lip to prevent the remote from falling through - two low side walls rising from the bottom, similar to a cradle - minimalist and functional - smooth rounded outer edges - slightly chamfered top entry for easier insertion - no unnecessary decorative details Construction requirements: - back plate thickness: 3 mm - side wall thickness: 2.8 mm - total holder height: about 80 mm - side wall height: about 45 mm - bottom front lip height: about 14 mm - provide a large flat rear surface for double-sided adhesive tape - design for FDM printing - optimize to print without supports - suitable for Bambu Lab A1 Mini - export as STL
Parameters
| Name | Value | Range |
|---|---|---|
| Cavity width | 38.2 mm | 20 – 80 |
| Cavity depth, back plate to lip | 15 mm | 8 – 30 |
| Overall holder height | 80 mm | 40 – 160 |
| Side wall height | 45 mm | 20 – 160 |
| Bottom front lip height | 14 mm | 4 – 40 |
| Back plate thickness | 3 mm | 1.2 – 8 |
| Side wall thickness | 2.8 mm | 1.2 – 8 |
| Front lip thickness | 2.8 mm | 1.2 – 8 |
| Bottom floor thickness | 3 mm | 1.2 – 8 |
| Rounded top corner radius | 6 mm | 1 – 15 |
| Top entry chamfer | 1.5 mm | 0.5 – 3 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
JZX100 Gas Cap Holder
can you make a gas cap holder for a jzx100 chaser. i want you to refer to the image and make a cad very close to the picture
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
