169.5180.0266.9
Loading the interactive model…
Interactive 3D model of Antique Spanish Frailero Armchair (1:5 assembled)

Enclosures and housings

Antique Spanish Frailero Armchair (1:5 assembled)

1 views
Bounding box
180.0 × 169.5 × 266.9 mm
Engine
3D Printing B-rep
Parameters
22
Published
November 16, 2026

Download

Free to download and use. See the terms.

The prompt

Authentic 17th-century antique Spanish "frailero" monk armchair, solid 3D model for 3D printing, isolated on a clean white studio background.EXACT SCALE & PROPORTIONS (1:5 Scale):Total Height: 266 mm (26.6 cm) Total Width: 168 mm (16.8 cm) Total Depth: 150 mm (15.0 cm) Strict proportional ratio of 26.6 : 16.8 : 15.0 (tall, upright, compact stance). DETAILED STRUCTURAL & ORNAMENTAL SPECIFICATIONS:Frame & Legs: Dark aged walnut wood frame with sturdy square-section vertical legs. The two rear posts tilt slightly backward above seat level and terminate in small vertical notched finials. Backrest: Rectangular dark distressed leather backrest stretched tightly between the upper rear posts, fastened along both left and right front vertical edges with 5 large round domed iron studs per side, plus matching iron studs along the outer side edges of the rear posts. Seat: Deeply sagging, concave dark leather seat panel suspended between the side seat rails, secured along each outer side edge with a horizontal row of 5 large round domed iron studs. Armrests: Two straight, flat solid dark wood armrests extending horizontally from the rear posts over the front legs, ending in subtle scroll-carved rounded overhanging front tips. Front Stretcher: Prominent wide front apron stretcher beneath the seat featuring crisp geometric relief carving: a central circular floral rosette framed inside linked octagonal and diamond-shaped carved moldings with notched top and bottom edges. Side & Rear Stretchers: One simple straight horizontal rear stretcher bar near the bottom, and two lower side stretchers featuring scalloped, wavy decorative bottom edges. 3D GEOMETRY & MESH REQUIREMENTS:Watertight manifold solid 3D mesh with real physical volume and thick walls suitable for 3D printing. Crisp, deep relief details on the front carving and studs. No floating parts, no non-manifold edges, no open surfaces, and no modernized modifications.

Parameters

NameValueRange
Overall width168 mm100 – 300
Overall depth150 mm100 – 300
Overall height266 mm180 – 400
Seat height150 mm100 – 250
Leg/post section30 mm15 – 60
Seat frame height35 mm20 – 60
Leather seat width150 mm80 – 250
Leather seat depth130 mm80 – 250
Leather seat thickness12 mm4 – 30
Backrest width150 mm80 – 250
Backrest height95 mm50 – 180
Backrest thickness12 mm4 – 30
Armrest length150 mm80 – 250
Armrest width30 mm15 – 60
Armrest thickness25 mm12 – 50
Side/rear stretcher section20 mm10 – 50
Front stretcher section22 mm10 – 50
Finial diameter18 mm8 – 40
Finial height25 mm10 – 60
Front leg top height190 mm140 – 280
Tack stud diameter4.5 mm2 – 8
Tack stud height2 mm1 – 6

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

3D preview of Cylindrical Stainless Steel Basket with Folding Handles368.0 × 250.0 × 252.1 mmPrecision

Cylindrical Stainless Steel Basket with Folding Handles

Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai

STEPSTLGLB15 PARAMS
3D preview of Immersion Cooling Enclosure592.0 × 402.0 × 166.0 mmPrecision

Immersion Cooling Enclosure

Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal

STEPSTLGLB15 PARAMS
3D preview of Lego 1x4 Technic Brick31.8 × 7.8 × 11.3 mmPrecision

Lego 1x4 Technic Brick

Create a precise 3D CAD model of a single 1x4 Lego Technic-compatible brick designed for STEM robotics. The main rectangular body must have exact dimensions: 31.8 mm in length, 7.8

STEPSTLGLB15 PARAMS
3D preview of Simple BWB with Propulsion Tube2130.0 × 6500.0 × 350.0 mmPrecision

Simple BWB with Propulsion Tube

Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a

STEPSTLGLB8 PARAMS
3D preview of Engranaje recto 50 dientes, módulo 2104.0 × 103.9 × 10.0 mmPrecision

Engranaje recto 50 dientes, módulo 2

Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá

STEPSTLGLB5 PARAMS
3D preview of G+1 Party Hall Structural Shell30000.0 × 60000.0 × 8950.0 mmPrecision

G+1 Party Hall Structural Shell

G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left

STEPSTLGLB19 PARAMS
Antique Spanish Frailero Armchair (1:5 assembled) - Free CAD Model (STEP, STL) | TextoCAD