Enclosures and housings
Angled Plate with 14 Holes
- Bounding box
- 275.9 × 130.0 × 20.0 mm
- Engine
- Precision B-rep
- Parameters
- 50
- Published
- October 8, 2026
Download
Free to download and use. See the terms.
The prompt
Create a 3D part using a sequential operation. STEP 1: Create a base rectangular solid on the XY plane. The width (X-axis) is 275.9mm, and the height (Y-axis) is 130mm. Extrude it to a thickness (Z-axis) of 20mm. Position the bottom-right corner of this rectangle exactly at the origin point (X:0, Y:0, Z:0). This means the rectangle extends into the negative X direction down to X:-275.9. STEP 2: Cut 14 through-holes through the entire 20mm thickness at the following exact X,Y center points: Hole 1: Diameter 22.1mm at X:-85.1, Y:38.31 Hole 2: Diameter 8.2mm at X:-15.0, Y:27.71 Hole 3: Diameter 8.2mm at X:-44.85, Y:105.86 Hole 4: Diameter 8.2mm at X:-228.65, Y:48.16 Hole 5: Diameter 8.2mm at X:-212.15, Y:105.86 Hole 6: Diameter 11.0mm at X:-112.9, Y:20.86 Hole 7: Diameter 11.0mm at X:-118.35, Y:96.46 Hole 8: Diameter 11.0mm at X:-183.75, Y:91.71 Hole 9: Diameter 11.0mm at X:-178.35, Y:16.16 Hole 10: Diameter 15.0mm at X:-81.3, Y:79.81 Hole 11: Diameter 15.0mm at X:-113.55, Y:111.81 Hole 12: Diameter 82.07mm at X:-148.35, Y:56.31 Hole 13: Diameter 13.0mm at X:-235.5, Y:115.0 Hole 14: Diameter 13.0mm at X:-252.0, Y:57.31 STEP 3: Remove material to create the bottom-left chamfer. Cut away all material below a line drawn from point (X:-275.9, Y:28.53) to point (X:-176.41, Y:0). STEP 4: Remove material to create the angled left edge. Cut away all material to the left of a line drawn from point (X:-275.9, Y:28.53) to point (X:-246.8, Y:130). STEP 5: Remove material to create the angled right edge. Cut away all material to the right of a line drawn from point (X:0, Y:30.49) to point (X:-38.2, Y:130).
Parameters
| Name | Value | Range |
|---|---|---|
| Base Width (X) | 275.9 mm | 1 – 600 |
| Base Height (Y) | 130 mm | 1 – 400 |
| Base Thickness (Z) | 20 mm | 0.1 – 100 |
| Bottom Chamfer Meet X | -176.41 mm | -300 – 0 |
| Bottom Chamfer Left Y | 28.53 mm | 0 – 130 |
| Left Angled Edge Top X | -246.8 mm | -300 – 0 |
| Right Angled Edge Bottom Y | 30.49 mm | 0 – 130 |
| Right Angled Edge Top X | -38.2 mm | -300 – 0 |
| Hole 1 Diameter | 22.1 mm | 0.1 – 120 |
| Hole 1 X | -85.1 mm | -300 – 0 |
| Hole 1 Y | 38.31 mm | 0 – 130 |
| Hole 2 Diameter | 8.2 mm | 0.1 – 120 |
| Hole 2 X | -15 mm | -300 – 0 |
| Hole 2 Y | 27.71 mm | 0 – 130 |
| Hole 3 Diameter | 8.2 mm | 0.1 – 120 |
| Hole 3 X | -44.85 mm | -300 – 0 |
| Hole 3 Y | 105.86 mm | 0 – 130 |
| Hole 4 Diameter | 8.2 mm | 0.1 – 120 |
| Hole 4 X | -228.65 mm | -300 – 0 |
| Hole 4 Y | 48.16 mm | 0 – 130 |
| Hole 5 Diameter | 8.2 mm | 0.1 – 120 |
| Hole 5 X | -212.15 mm | -300 – 0 |
| Hole 5 Y | 105.86 mm | 0 – 130 |
| Hole 6 Diameter | 11 mm | 0.1 – 120 |
| Hole 6 X | -112.9 mm | -300 – 0 |
| Hole 6 Y | 20.86 mm | 0 – 130 |
| Hole 7 Diameter | 11 mm | 0.1 – 120 |
| Hole 7 X | -118.35 mm | -300 – 0 |
| Hole 7 Y | 96.46 mm | 0 – 130 |
| Hole 8 Diameter | 11 mm | 0.1 – 120 |
| Hole 8 X | -183.75 mm | -300 – 0 |
| Hole 8 Y | 91.71 mm | 0 – 130 |
| Hole 9 Diameter | 11 mm | 0.1 – 120 |
| Hole 9 X | -178.35 mm | -300 – 0 |
| Hole 9 Y | 16.16 mm | 0 – 130 |
| Hole 10 Diameter | 15 mm | 0.1 – 120 |
| Hole 10 X | -81.3 mm | -300 – 0 |
| Hole 10 Y | 79.81 mm | 0 – 130 |
| Hole 11 Diameter | 15 mm | 0.1 – 120 |
| Hole 11 X | -113.55 mm | -300 – 0 |
| Hole 11 Y | 111.81 mm | 0 – 130 |
| Hole 12 Diameter | 82.07 mm | 0.1 – 120 |
| Hole 12 X | -148.35 mm | -300 – 0 |
| Hole 12 Y | 56.31 mm | 0 – 130 |
| Hole 13 Diameter | 13 mm | 0.1 – 120 |
| Hole 13 X | -235.5 mm | -300 – 0 |
| Hole 13 Y | 115 mm | 0 – 130 |
| Hole 14 Diameter | 13 mm | 0.1 – 120 |
| Hole 14 X | -252 mm | -300 – 0 |
| Hole 14 Y | 57.31 mm | 0 – 130 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no