Enclosures and housings
Andresito Guacurari Monument Sculpture
- Bounding box
- 92.0 × 74.3 × 258.0 mm
- Engine
- Precision B-rep
- Parameters
- 20
- Published
- October 20, 2026
Download
Free to download and use. See the terms.
The prompt
3D printable sculpture model of Andresito Guacurarí monument on a rustic stone pedestal. Solid watertight mesh, manifold geometry, FDM and resin printing ready. CHARACTER: Heroic indigenous warrior statue standing on top. Right arm pointing forward at 45 degrees. Left arm holding a tall spear anchored to the base. Wearing a leather tunic, sash belt, and animal skin cape. Native features with long hair and headband. Weathered bronze patina texture. PEDESTAL: Tall rectangular monument base made of porous, highly textured red-brown laterite sandstone blocks with deep mortar joints. Flat bottom surface for print bed stability. Small rectangular plaque on the front face. PRINT OPTIMIZATION: High-detail mesh, no floating elements or disconnected shells. Thickened spear shaft and pointing finger for structural strength (minimum 1.5mm wall thickness). Self-supporting angles where possible. Single merged mesh object.
Parameters
| Name | Value | Range |
|---|---|---|
| Pedestal Width | 80 mm | 40 – 160 |
| Pedestal Depth | 60 mm | 30 – 140 |
| Pedestal Height | 120 mm | 60 – 240 |
| Base Plinth Height | 10 mm | 4 – 30 |
| Plinth Overhang | 6 mm | 0 – 20 |
| Stone Block Courses | 4 count | 1 – 10 |
| Mortar Joint Width | 3 mm | 1 – 8 |
| Mortar Joint Depth | 2 mm | 0.5 – 6 |
| Plaque Width | 30 mm | 10 – 70 |
| Plaque Height | 14 mm | 6 – 40 |
| Plaque Thickness | 2 mm | 0.5 – 6 |
| Leg Radius | 6 mm | 2 – 14 |
| Leg Height | 45 mm | 20 – 90 |
| Torso Radius | 14 mm | 6 – 32 |
| Torso Height | 55 mm | 25 – 110 |
| Head Radius | 9 mm | 4 – 22 |
| Arm Radius | 4 mm | 2 – 12 |
| Pointing Arm Length | 40 mm | 20 – 90 |
| Spear Shaft Radius | 3 mm | 1.5 – 8 |
| Spear Length | 150 mm | 60 – 280 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no