Enclosures and housings
Alhambra Quadrants
- Bounding box
- 230 × 60.5 × 29 mm
- Engine
- 3D Printing B-rep
- Parameters
- 18
- Published
- November 3, 2026
Download
Free to download and use. See the terms.
The prompt
4. Connection system correction – Hidden tongue-and-groove joints Replace all cylindrical alignment pegs and sockets with a concealed tongue-and-groove connection system. Create narrow, continuous rectangular alignment tongues along the internal joining edges of the four sections. Create matching recessed grooves in the adjacent sections. Tongues must extend horizontally from the joining faces, never vertically upward. Tongue dimensions: approximately 2 mm thick and 3 mm deep. Groove dimensions: approximately 2.3 mm wide and 3.2 mm deep to provide printing clearance. Position connections near the lower structural portion of the model. Keep all connectors hidden from the exterior when assembled. Do not allow connectors to protrude above the palace floor, walls, towers, or decorative architectural surfaces. Ensure the four sections slide together horizontally and align flush. Maintain the original 115 mm × 115 mm assembled footprint. Do not create oversized rectangular blocks, vertical tabs, or upward-facing protrusions. Ensure all connections are integrated into the four structural bodies and are suitable for FDM 3D printing.
Parameters
| Name | Value | Range |
|---|---|---|
| Quadrant footprint | 57.5 mm | 40 – 60 |
| Max assembly height | 30 mm | 20 – 40 |
| Base slab thickness | 3 mm | 2 – 6 |
| Wall thickness | 3 mm | 2 – 6 |
| Wall height | 16 mm | 10 – 24 |
| Tower height | 26 mm | 18 – 30 |
| Arcade opening height | 8 mm | 6 – 12 |
| Arcade column diameter | 3 mm | 2.4 – 5 |
| Arch opening width | 5 mm | 3 – 8 |
| Ornament boss diameter | 2 mm | 1.2 – 4 |
| Ornament relief depth | 0.8 mm | 0.6 – 1.5 |
| Wall inset from edge | 4 mm | 2 – 8 |
| Gap between exploded parts (0 = assembled) | 0 mm | 0 – 30 |
| Tongue thickness | 2 mm | 1.2 – 3 |
| Tongue depth | 3 mm | 2 – 5 |
| Groove width | 2.3 mm | 1.4 – 4 |
| Groove depth | 3.2 mm | 2.2 – 5 |
| Margin from exterior ends | 6 mm | 2 – 15 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no