Enclosures and housings
Algae Pillar Photobioreactor
- Bounding box
- 400 × 300 × 1684.0 mm
- Engine
- 3D Printing B-rep
- Parameters
- 18
- Published
- October 29, 2026
Download
Free to download and use. See the terms.
The prompt
Create a 3D AutoCAD solid model of a cylindrical "Algae Pillar". Dimensions in cm. Coaxial alignment on [0,0,Z]. 1. LAYERS: "BASE_HDPE" (Grey), "TANK_PMMA" (Clear), "FLUID" (Green), "SOLAR" (Blue). 2. BASE (Layer BASE_HDPE): CYLINDER at, Radius=15, Height=45. Subtract a front box (15x2x25 cm) for a maintenance door hatch. 3. TANK (Layer TANK_PMMA): CYLINDER at, Radius=15, Height=85. 4. FLUID (Layer FLUID): CYLINDER at, Radius=14, Height=85 (nested inside the tank). 5. CAP (Layer BASE_HDPE): CYLINDER at, Radius=15, Height=20. 6. SOLAR PANEL (Layer SOLAR): Stem CYLINDER at, Radius=2, Height=10. On top, create an elliptical plate (major axis=40, minor axis=25, thickness=3), rotated 35 degrees relative to XY plane. Use clean 3D solid primitives and boolean operations.
Parameters
| Name | Value | Range |
|---|---|---|
| Base radius | 150 mm | 80 – 250 |
| Base height | 450 mm | 100 – 800 |
| Bottom chamfer | 4 mm | 0 – 10 |
| Maintenance hatch width | 150 mm | 40 – 240 |
| Maintenance hatch height | 250 mm | 60 – 400 |
| Hatch bottom height | 100 mm | 10 – 300 |
| Hatch recess depth | 20 mm | 4 – 40 |
| Tank height | 850 mm | 200 – 1500 |
| Tank wall thickness | 8 mm | 3 – 20 |
| Fluid radius | 140 mm | 50 – 240 |
| Fluid column height | 850 mm | 100 – 1500 |
| Cap height | 200 mm | 40 – 400 |
| Solar stem radius | 20 mm | 6 – 60 |
| Solar stem height | 100 mm | 20 – 300 |
| Panel major axis | 400 mm | 100 – 800 |
| Panel minor axis | 250 mm | 80 – 600 |
| Panel thickness | 30 mm | 6 – 60 |
| Panel tilt from horizontal | 35 deg | 0 – 60 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no