Enclosures and housings
AirPods Max Spider Claw Cover
- Bounding box
- 56.3 × 78.4 × 13.0 mm
- Engine
- Precision B-rep
- Parameters
- 15
- Published
- October 31, 2026
Download
Free to download and use. See the terms.
The prompt
The design is a black, glossy, spider-like claw cover that sits over the outside of one Apple AirPods Max earcup. The claw has: - One central vertical body running down the middle. - Six irregular, curved, pointed legs extending outwards. - Three legs on each side, with asymmetrical positioning. - Rounded, slightly raised connections between the legs and centre. - Tapered ends with smooth, rounded tips. - A glossy black finish. - An open design that leaves parts of the silver earcup visible. Important: The reference image doesn't provide a scale, so exact claw dimensions cannot be measured from it. The following is a starting CAD specification, not verified manufacturing dimensions. ## Copy and paste this into TextoCAD 3D CAD prompt Create a decorative black spider-claw attachment for the outer face of an Apple AirPods Max earcup. Overall dimensions: - Width: 72 mm - Height: 86 mm - Maximum thickness: 4 mm - Base material thickness: 2.5 mm - Central body width: 11 mm - Central body length: 76 mm Claw structure: - One long, slightly irregular central vertical spine. - Six curved, organic-looking claw extensions, three on each side. - Upper left extension: 22 mm long. - Middle left extension: 27 mm long. - Lower left extension: 25 mm long. - Upper right extension: 24 mm long. - Middle right extension: 29 mm long. - Lower right extension: 26 mm long. - Each extension should taper from approximately 7 mm at its base to 3 mm at its tip. - Make the extensions slightly curved and uneven, resembling organic spider legs. - Add smooth rounded transitions where the legs connect to the central body. - Use a glossy black appearance. Fit and construction: - Design for the exterior face of the Apple AirPods Max earcup. - Give the claw a gentle curvature to follow the earcup's surface. - Keep the design lightweight. - Add small removable silicone contact pads on the back. - Do not cover the Digital Crown, noise control button, microphones or other openings. - Do not use permanent adhesive or metal contact with the headphones. - Keep the model as one connected, printable 3D object. - Make all dimensions editable in the CAD feature tree. - Exportable as STL and STEP. Reference dimensions: The AirPods Max earcup is approximately 83.44 mm wide and 103.28 mm high.  [image](https://www.google.com/s2/favicons?domain=https://www.xemstudio.com\&sz=32) Xem Studio Important: These claw measurements are proposed starting dimensions based on your picture, not measurements of the original accessory. Check your actual earcup before printing; the 72 × 86 mm design is intended to leave some of its silver surface visible.
Parameters
| Name | Value | Range |
|---|---|---|
| Spine Length | 76 mm | 50 – 100 |
| Spine Width | 11 mm | 6 – 20 |
| Max Thickness | 4 mm | 2 – 8 |
| Base Thickness | 2.5 mm | 1 – 5 |
| Earcup Curve Radius | 120 mm | 80 – 200 |
| Leg Base Width | 7 mm | 4 – 12 |
| Leg Tip Width | 3 mm | 1 – 6 |
| Upper Left Leg Length | 22 mm | 10 – 40 |
| Middle Left Leg Length | 27 mm | 10 – 40 |
| Lower Left Leg Length | 25 mm | 10 – 40 |
| Upper Right Leg Length | 24 mm | 10 – 40 |
| Middle Right Leg Length | 29 mm | 10 – 40 |
| Lower Right Leg Length | 26 mm | 10 – 40 |
| Pad Diameter | 6 mm | 3 – 10 |
| Pad Thickness | 1.5 mm | 0.5 – 3 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no