Jigs and fixtures
Aggressive Paddle Tail Jig Lure
- Bounding box
- 88.0 × 13.0 × 67.6 mm
- Engine
- Precision B-rep
- Parameters
- 11
- Published
- August 31, 2026
Download
Free to download and use. See the terms.
The prompt
Create a premium, unique soft plastic fishing lure (jig) with a striking and aggressive design. Specifications: - Length: 75 mm - Flat nose front with a sharp, clean flat surface - Body tapering from 13 mm height to 5 mm at the tail - Width: 11 mm Design style: - Front section: smooth, muscular shape - Mid section: deep ribbed texture (1.2 mm deep, 2 mm spacing) - Rear section: flowing organic lines for water movement - Add a defined spine on top and a small keel underneath Tail: - Paddle tail, slightly offset (not perfectly centered) - Tail arm: 16 mm long, 1.8 mm thick - Paddle diameter: 13 mm - Paddle angled 30 degrees Extra details: - Subtle eye sockets - Sharp transitions between smooth and textured areas - Make it look futuristic, aggressive, and premium Ensure smooth organic curves, symmetry, and suitability for mold making and 3D printing.
Parameters
| Name | Value | Range |
|---|---|---|
| Length | 75 mm | 50 – 120 |
| Width | 11 mm | 8 – 20 |
| Height at Front | 13 mm | 8 – 25 |
| Height at Tail | 5 mm | 3 – 10 |
| Rib Depth | 1.2 mm | 0.5 – 3 |
| Rib Spacing | 2 mm | 1 – 5 |
| Tail Arm Length | 16 mm | 10 – 30 |
| Tail Arm Thickness | 1.8 mm | 1 – 4 |
| Paddle Diameter | 13 mm | 8 – 20 |
| Paddle Angle (deg) | 30 deg | 0 – 45 |
| Eye Socket Diameter | 3 mm | 1 – 6 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Six-Canister Film Tray
Create a tray for six 35 mm film canisters with transport handles
Washbasin Stand
Create a welded stainless-steel washbasin stand made from rectangular hollow sections 40 × 60 × 3 mm. The stand consists of two parallel vertical rectangular side frames facing ea
M5 Hex Bolt and Nut Assembly
Create a precise, editable, parametric mechanical CAD assembly based on the provided engineering drawing reference. UNIT SYSTEM: Use millimeters (mm). Model all dimensions exactl