Brackets and mounts
Aerodynamic Medical Drone Fuselage
- Bounding box
- 280.9 × 163.4 × 68.3 mm
- Engine
- Precision B-rep
- Parameters
- 22
- Published
- November 8, 2026
Download
Free to download and use. See the terms.
The prompt
Create an aerodynamic medical drone fuselage and central housing. The main body is teardrop-shaped, 280 mm long, 140 mm wide, and 70 mm high, featuring a streamlined nose cone that tapers smoothly toward the rear to minimize drag for high-speed flight. Include a central internal electronics cavity measuring 100 mm long, 60 mm wide, and 45 mm deep in the upper section for the flight controller and battery. In the lower section, add a medical payload bay measuring 80 mm long, 50 mm wide, and 30 mm deep to hold an AED and emergency medical kit. Add four reinforced mounting pads extending symmetrically from the sides for motor arms. Finish the outer edges with 3 mm fillets and internal corners with 2 mm fillets.
Parameters
| Name | Value | Range |
|---|---|---|
| Fuselage Length | 280 mm | 150 – 500 |
| Max Width | 140 mm | 80 – 260 |
| Max Height | 70 mm | 40 – 160 |
| Max Section From Nose | 110 mm | 50 – 180 |
| Tail Taper Exponent | 0.6 | 0.3 – 1.2 |
| Outer Fillet Radius | 3 mm | 0 – 8 |
| Inner Fillet Radius | 2 mm | 0 – 6 |
| Electronics Bay Length | 100 mm | 40 – 200 |
| Electronics Bay Width | 60 mm | 20 – 120 |
| Electronics Bay Depth | 45 mm | 15 – 65 |
| Electronics Bay Centre X | 95 mm | 30 – 250 |
| Payload Bay Length | 80 mm | 30 – 180 |
| Payload Bay Width | 50 mm | 20 – 110 |
| Payload Bay Depth | 30 mm | 10 – 60 |
| Payload Bay Centre X | 190 mm | 30 – 260 |
| Arm Pad Length | 34 mm | 15 – 70 |
| Arm Pad Protrusion | 18 mm | 5 – 60 |
| Arm Pad Thickness | 16 mm | 6 – 40 |
| Arm Pad Height (Z) | 30 mm | 10 – 60 |
| Mount Bolt Hole Dia | 4 mm | 2 – 10 |
| Front Pad Station X | 80 mm | 30 – 170 |
| Rear Pad Station X | 185 mm | 100 – 250 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
SG90 2-DOF Robotic Arm Assembly
"Design a compact, 3D-printable 2-DOF robotic arm specifically for a mobile library robot. The arm should consist of a rotating base joint, a lower link, an upper link, and a simpl