Brackets and mounts
AEGIS luxury sedan exploded multi-part assembly
- Bounding box
- 81684.9 × 1800 × 1284.0 mm
- Engine
- 3D Printing B-rep
- Parameters
- 38
- Published
- November 16, 2026
Download
Free to download and use. See the terms.
The prompt
Create a detailed 3D CAD model of a modern BMW-inspired four-door luxury sedan based on the uploaded reference image. The vehicle must have a realistic automotive chassis, four wheels, independent front and rear suspension assemblies, and a transparent body shell that exposes the internal mechanical components. The main engineering feature is the AEGIS hybrid electromagnetic suspension system. At each wheel, include: - A conventional helical coil spring. - A hydraulic shock absorber. - A separate linear electromagnetic actuator. - Upper and lower suspension mounting brackets. - Control arms and wheel hub assemblies. The electromagnetic actuator should have a cylindrical housing, central moving shaft, visible internal coil section and mechanical mounting brackets. Position it parallel to the conventional damper. Include a front-mounted LiDAR sensor, a central electronic control unit, a battery enclosure, power distribution module and visible cable routing. Use a dark graphite metallic chassis with subtle magenta accents on the electromagnetic components. IMPORTANT: - Create separate editable 3D components. - Maintain realistic mechanical proportions. - Avoid intersecting components. - Do not merge the suspension into the chassis. - Prioritize accurate mechanical geometry over decorative details. Generate a clean, professional automotive engineering CAD assembly with an exploded-view option.
Parameters
| Name | Value | Range |
|---|---|---|
| spacing between parts | 5500 mm | 4000 – 8000 |
| Body length | 4800 mm | 4000 – 6000 |
| Body width | 1850 mm | 1500 – 2500 |
| Body height | 1450 mm | 1200 – 1800 |
| Transparent shell wall thickness | 8 mm | 3 – 20 |
| Chassis length | 4700 mm | 4000 – 5500 |
| Chassis width | 1800 mm | 1500 – 2200 |
| Chassis height | 400 mm | 250 – 600 |
| Corner assembly length | 650 mm | 400 – 900 |
| Corner assembly width | 450 mm | 300 – 600 |
| Corner assembly height | 700 mm | 500 – 900 |
| Helical spring outer diameter | 160 mm | 100 – 240 |
| Spring free length | 220 mm | 120 – 300 |
| Spring wire diameter | 14 mm | 6 – 22 |
| Shock absorber body diameter | 55 mm | 30 – 80 |
| Shock absorber body length | 250 mm | 150 – 350 |
| AEGIS actuator housing diameter | 95 mm | 45 – 140 |
| AEGIS actuator housing length | 420 mm | 250 – 600 |
| Wheel hub/rotor diameter | 160 mm | 80 – 240 |
| Tire overall diameter | 680 mm | 500 – 900 |
| Tire width | 245 mm | 180 – 350 |
| LiDAR length | 120 mm | 80 – 200 |
| LiDAR width | 100 mm | 60 – 180 |
| LiDAR height | 90 mm | 50 – 160 |
| ECU enclosure length | 220 mm | 120 – 320 |
| ECU enclosure width | 160 mm | 90 – 260 |
| ECU enclosure height | 50 mm | 30 – 100 |
| Battery enclosure length | 1600 mm | 1000 – 2200 |
| Battery enclosure width | 1200 mm | 800 – 1600 |
| Battery enclosure height | 180 mm | 100 – 300 |
| Mounting flange width | 50 mm | 30 – 100 |
| Mounting flange height | 10 mm | 5 – 30 |
| PDU length | 180 mm | 100 – 300 |
| PDU width | 120 mm | 70 – 220 |
| PDU height | 70 mm | 40 – 140 |
| Smallest visible harness diameter | 8 mm | 4 – 16 |
| Largest visible harness diameter | 12 mm | 6 – 20 |
| Main power harness diameter | 10 mm | 6 – 20 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
JZX100 Gas Cap Holder
can you make a gas cap holder for a jzx100 chaser. i want you to refer to the image and make a cad very close to the picture
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
