Enclosures and housings
Adjustable Phone Stand Hirth Joint Cylinder
- Bounding box
- 25.0 × 25.0 × 10.0 mm
- Engine
- Precision B-rep
- Parameters
- 7
- Published
- October 7, 2026
Download
Free to download and use. See the terms.
The prompt
Create a 3D-printable component for an adjustable phone stand. Generate a solid cylinder with a diameter of 25mm and a thickness of 10mm. Place a central bore hole with a diameter of 5.2mm all the way through the axis for an M5 bolt alignment. On the top circular face of the cylinder, generate a Hirth joint mechanism consisting of 24 teeth patterned circularly around the axis. The teeth profile should use a 60-degree V-groove configuration with a depth of 1.5mm to allow secure, positive locking mechanical mating."
Parameters
| Name | Value | Range |
|---|---|---|
| Cylinder Diameter | 25 mm | 20 – 40 |
| Cylinder Thickness | 10 mm | 5 – 20 |
| Central Bore Diameter | 5.2 mm | 3 – 10 |
| Hirth Tooth Count | 24 | 6 – 48 |
| V-Groove Depth | 1.5 mm | 0.5 – 3 |
| V-Groove Included Angle | 60 deg | 30 – 90 |
| Tooth Ring Inner Radius | 7 mm | 5 – 10 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no