Brackets and mounts
Adjustable Container Securing System (Exploded)
- Bounding box
- 4835.0 × 360.0 × 55.0 mm
- Engine
- Precision B-rep
- Parameters
- 52
- Published
- November 18, 2026
Download
Free to download and use. See the terms.
The prompt
Short Prompt: Design a 3D CAD model of an Adjustable Container Securing System using Autodesk Fusion 360. The design should feature a 400 × 300 × 8 mm mild-steel base plate, parallel sliding guide rails, four adjustable sliding clamps, screw/bolt locking mechanisms, rubber clamping pads, and movable supports. Use slider joints to enable smooth clamp movement and accommodate containers ranging from approximately 100–300 mm in width and length. Create separate components and assemble them using appropriate Fusion 360 joints. Include realistic dimensions, manufacturing-friendly geometry, material assignments, an assembled isometric view, front/top/side views, and an exploded assembly view. The design should be compact, strong, practical, and easy to manufacture, demonstrating a universal container holder that reduces cost and material waste while supporting SDG 9 and SDG 12.
Parameters
| Name | Value | Range |
|---|---|---|
| Base Plate Length | 400 mm | 200 – 600 |
| Base Plate Width | 300 mm | 150 – 500 |
| Base Plate Thickness | 8 mm | 4 – 20 |
| Corner Radius | 10 mm | 2 – 30 |
| Mounting Hole Dia | 11 mm | 5 – 20 |
| Mounting Hole Inset | 25 mm | 15 – 60 |
| Rail Adjust Slot Length | 50 mm | 20 – 100 |
| Rail Adjust Slot Width | 11 mm | 6 – 20 |
| Rail Offset From Center | 120 mm | 50 – 180 |
| Rail Length | 360 mm | 200 – 380 |
| Rail Base Width | 24 mm | 15 – 40 |
| Rail Height | 18 mm | 10 – 30 |
| Rail Web Width | 18 mm | 10 – 30 |
| Rail Base Flange Thk | 6 mm | 3 – 12 |
| T-Slot Mouth Width | 10 mm | 5 – 16 |
| T-Slot Cavity Width | 14 mm | 8 – 22 |
| T-Slot Depth | 7 mm | 3 – 12 |
| T-Slot Mouth Depth | 3 mm | 1 – 6 |
| Rail Bolt Spacing | 240 mm | 100 – 320 |
| Rail Bolt Slot Length | 30 mm | 12 – 60 |
| Rail Bolt Slot Width | 9 mm | 5 – 14 |
| Clamp Body Width | 30 mm | 20 – 60 |
| Clamp Body Length | 80 mm | 50 – 140 |
| Clamp Body Height | 55 mm | 30 – 90 |
| Guide Slot Width | 20 mm | 10 – 30 |
| Guide Slot Depth | 20 mm | 8 – 35 |
| Jaw Thickness | 12 mm | 5 – 25 |
| Jaw Length | 65 mm | 30 – 100 |
| Jaw Height | 30 mm | 15 – 60 |
| Jaw Bottom Height | 18 mm | 5 – 40 |
| Lock Bolt Hole Dia | 9 mm | 6 – 14 |
| Lock Bolt Hole Height | 14 mm | 5 – 30 |
| Bolt Thread Dia | 8 mm | 5 – 16 |
| Bolt Shank Length | 28 mm | 10 – 60 |
| Knob Diameter | 22 mm | 12 – 40 |
| Knob Height | 14 mm | 6 – 30 |
| Knob Flutes | 12 count | 6 – 20 |
| Washer OD | 16 mm | 10 – 30 |
| Washer ID | 8.4 mm | 5 – 16 |
| Washer Thickness | 1.6 mm | 0.5 – 5 |
| Pad Length | 60 mm | 30 – 100 |
| Pad Height | 25 mm | 10 – 60 |
| Pad Thickness | 6 mm | 2 – 15 |
| Pad Edge Radius | 1.5 mm | 0.2 – 4 |
| Support Length | 70 mm | 40 – 120 |
| Support Width | 40 mm | 20 – 80 |
| Support Height | 30 mm | 15 – 60 |
| Support Base Thickness | 12 mm | 5 – 25 |
| Support Slot Length | 30 mm | 10 – 60 |
| Support Slot Width | 10 mm | 4 – 20 |
| Top Pad Thickness | 5 mm | 1 – 15 |
| Exploded Layout Gap | 460 mm | 250 – 900 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
JZX100 Gas Cap Holder
can you make a gas cap holder for a jzx100 chaser. i want you to refer to the image and make a cad very close to the picture
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
