Enclosures and housings
Adapter Plug
- Bounding box
- 32.1 × 25.2 × 53.6 mm
- Engine
- Precision B-rep
- Parameters
- 8
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
"Create a 3D printable mechanical adapter plug with three connected sections: 1. A solid base cylinder that is 19mm in diameter and 20mm long. 2. A central transition wedge that matches the 19mm diameter base, but its top face is angled at a 35-degree tilt. The wedge should flare out slightly to a 25mm outer diameter at the top. 3. A hollow receiver cup extending straight out from the 35-degree angled face. The outer diameter of the cup is 25mm, and it has an internal circular pocket/hole that is 14.5mm in diameter and 15mm deep to accept a rubber expansion plug. The final model must be a single, manifold solid manifold object suitable for 3D printing."
Parameters
| Name | Value | Range |
|---|---|---|
| Base Diameter | 19 mm | 10 – 100 |
| Base Length | 20 mm | 5 – 100 |
| Tilt Angle | 35 deg | 5 – 85 |
| Top Flare Diameter | 25 mm | 15 – 50 |
| Wedge Height (Center Offset) | 10 mm | 5 – 30 |
| Cup Outer Length | 20 mm | 5 – 50 |
| Pocket Diameter | 14.5 mm | 5 – 30 |
| Pocket Depth | 15 mm | 5 – 50 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no