8079.975.3
Loading the interactive model…
Interactive 3D model of Action cam slide-in cradle B - loft post (door end)

Brackets and mounts

Action cam slide-in cradle B - loft post (door end)

1 views
Bounding box
79.9 × 80 × 75.3 mm
Engine
3D Printing B-rep
Parameters
18
Published
November 16, 2026

Download

Free to download and use. See the terms.

The prompt

Make the mounts just hold the camera, slide in, no extra hardware. Loft-post version, looking diagonally back across the room.

Parameters

NameValueRange
Height of the mount on the wall (mm from floor)1920 mm300 – 2600
Height of what the camera should look at (mm from floor)1000 mm0 – 2400
How far away that is, measured along the floor4930 mm300 – 8000
Turn left/right from straight out (deg, + = to your right as you face the wall)28 mm-75 – 75
Camera body width, side to side59.2 mm40 – 80
Camera body height, bottom to top41 mm30 – 60
Camera body depth, screen to front face, NOT counting the lens bump24 mm15 – 40
Clearance per side0.4 mm0 – 1.2
Cradle wall thickness2.4 mm1.6 – 4
Width of the front lips beside the lens window4 mm2 – 10
Height of the front lip under the lens7 mm3 – 15
Height of the side rails, keep low so the USB port is clear5 mm2 – 15
Plate width44 mm36 – 80
Plate height80 mm60 – 140
Plate thickness5 mm4 – 10
Screw hole, 4.5 = #8 wood screw4.5 mm3.5 – 6
Countersink diameter9 mm7 – 12
Gap from plate to the back of the cradle30 mm15 – 80

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

Action cam slide-in cradle B - loft post (door end) - Free CAD Model (STEP, STL) | TextoCAD