Acrylic Tarantula Terrarium

Create a 3D CAD assembly of a minimalist premium transparent acrylic terrarium for a terrestrial tarantula, consisting of separate parametric solid components using millimeters (mm). Total external dimensions: 200 mm wide (X), 150 mm deep (Y), 150 mm high (Z). Acrylic material thickness is 3 mm. Components and layout specification: 1. Bottom Plate: - Horizontal rectangular plate measuring 200 mm wide by 150 mm deep, thickness 3 mm. Positioned at Z = 0. 2. Back Wall: - Vertical rectangular plate measuring 200 mm wide by 147 mm high, thickness 3 mm. Mounted flush along the back edge of the Bottom Plate. 3. Side Walls (Left and Right): - Two vertical plates, each measuring 144 mm deep (Y) by 147 mm high (Z), thickness 3 mm. - Add a safe ventilation grid to both side walls: array nine through-holes of exactly 2.5 mm diameter on each side, spaced 8 mm apart in a tight 3x3 pattern centered near the upper half of the wall to maintain humidity and prevent escapes. 4. Front Substrate Barrier: - Create a fixed horizontal front wall panel measuring 194 mm wide by 50 mm high and 3 mm thick. Positioned at the lower front between the side walls (from Z = 3 to Z = 53) to hold 5 cm of burrowing substrate. 5. Front Sliding Door Tracks: - Create a lower dual-channel track block measuring 194 mm wide, 10 mm deep, and 6 mm high, with two parallel 3.5 mm wide, 3 mm deep slots. Mounted directly on top of the Front Substrate Barrier (starting at Z = 53). - Create an upper dual-channel track block mirroring the lower track, but with 6 mm deep slots. Positioned flush at the front top (Z = 144). 6. Front Sliding Doors (Two Pieces, Overlapping): - Create two identical sliding panels. Each panel is 102 mm wide, 92 mm high, and 3 mm thick to fit precisely inside the upper and lower tracks with a 10 mm central overlap. - Add safe ventilation holes: on each door, array four through-holes of exactly 2.5 mm diameter in a horizontal row near the top edge. 7. Removable Top Panel: - Flat top cover plate measuring 200 mm wide by 147 mm deep, thickness 3 mm. Rests flush on top of the back and side walls.

Parameters

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.