Brackets and mounts
AADP Compact Electronics Enclosure (Body + Removable Lid)
- Bounding box
- 100.0 × 70.0 × 39.0 mm
- Engine
- Precision B-rep
- Parameters
- 17
- Published
- November 5, 2026
Download
Free to download and use. See the terms.
The prompt
Create a parametric 3D CAD model of a compact electronics enclosure for an experimental aerospace instrumentation project called AADP. DESIGN OBJECTIVE: Create a clean, modular enclosure for a passive data-logging electronics prototype. REQUIREMENTS: - Metric units (millimeters). - Editable parametric geometry. - Separate enclosure body and removable lid. - Internal space for a small microcontroller PCB. - Cable-entry openings. - Accessible mounting points. - Rounded external edges. - Uniform, configurable wall thickness. - Clearly defined parameters for overall length, width, height, wall thickness, lid thickness, and mounting features. DESIGN CONSTRAINTS: - No unnecessary decorative features. - Avoid complex geometry that makes manufacturing difficult. - Keep the lid and body as separate components. - Do not assume specific PCB dimensions; make the internal layout configurable. - Do not claim structural, thermal, vibration, or aerospace qualification. OUTPUT: Generate editable CAD geometry, a parameter list, and a clear description of the design assumptions. Export a STEP model if supported.
Parameters
| Name | Value | Range |
|---|---|---|
| Body Length (X) | 100 mm | 40 – 300 |
| Body Width (Y) | 70 mm | 30 – 250 |
| Body Height (Z) | 35 mm | 10 – 150 |
| Wall Thickness | 2.5 mm | 1 – 8 |
| Base Thickness | 2.5 mm | 1 – 8 |
| External Corner Radius | 3 mm | 1 – 20 |
| Bottom Edge Fillet | 1 mm | 0 – 3 |
| Cable Entry Diameter | 10 mm | 3 – 25 |
| Cable Entries (2 = short sides, 4 = all sides) | 2 pcs | 2 – 4 |
| Cable Entry Height Above Base | 20 mm | 5 – 140 |
| Standoff Boss Diameter | 6 mm | 3 – 15 |
| Standoff Boss Height | 6 mm | 1 – 25 |
| Standoff Inset From Outer Edge | 8 mm | 4 – 40 |
| M3 Screw Hole Diameter | 3.2 mm | 1 – 8 |
| Lid Thickness | 4 mm | 1 – 20 |
| Lid Counterbore Diameter | 6 mm | 2 – 15 |
| Lid Counterbore Depth | 2 mm | 0.5 – 10 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o