Enclosures and housings
AAC Picture Token Body
- Bounding box
- 66.0 × 76.0 × 11.5 mm
- Engine
- Precision B-rep
- Parameters
- 18
- Published
- August 7, 2026
Download
Free to download and use. See the terms.
The prompt
Create one watertight 3D printable mechanical part: an AAC picture token body with a stepped front pocket. Make the part as one solid body. Coordinate orientation: - The front face is the top surface. - The back face is the bottom surface. - The pull tab is on the top edge of the square. Main body: - Rounded square body - Width: 66 mm - Height: 66 mm - Thickness: 11.5 mm - Corner radius: 7 mm - Add a centered pull tab on the top edge - Pull tab size: 24 mm wide, 10 mm tall, 11.5 mm thick - Pull tab corners should be rounded - Body and tab should be joined into one solid part Front face stepped pocket: Create a two-level recessed pocket in the front/top face. Level 1: upper retainer-frame seat - Cut a rounded square recessed seat into the front face - Seat size: 60 mm x 60 mm - Seat depth: 2.0 mm - Seat centered on the token body - This upper seat is where a separate front retainer frame will sit - Leave a visible raised outside border around this 60 mm seat Level 2: lower image and laminate pocket - Inside the 60 mm retainer seat, cut a deeper centered pocket - Lower pocket size: 54 mm x 54 mm - Lower pocket depth: additional 1.5 mm - Total depth at the lower image pocket should be 3.5 mm from the original top surface - This lower pocket holds a wrapper, photo, printed symbol, or clear laminate - The lower pocket must be a real recessed tray, not an engraved line Back face magnet pockets: - Cut two circular blind holes into the back/bottom face - Each hole diameter: 10.4 mm - Each hole depth: 3.2 mm - Holes are centered left-to-right - Upper magnet hole center is 16 mm above the body center - Lower magnet hole center is 16 mm below the body center - Holes must be open from the back/bottom face Back cover plate seat: - Add a shallow recessed square area on the back face around the two magnet holes - Recessed cover seat size: 47 mm x 47 mm - Cover seat depth: 1.0 mm - Center the cover seat on the back face - Magnet holes should remain visible inside this recessed cover seat Finish: - Slightly fillet or round external edges - Avoid thin fragile features - Make the model one valid watertight solid - No supports required - Export as STL
Parameters
| Name | Value | Range |
|---|---|---|
| Width | 66 mm | 40 – 100 |
| Height | 66 mm | 40 – 100 |
| Thickness | 11.5 mm | 5 – 20 |
| Corner Radius | 7 mm | 1 – 15 |
| Tab Width | 24 mm | 10 – 40 |
| Tab Height | 10 mm | 5 – 20 |
| Tab Thickness | 11.5 mm | 5 – 20 |
| Tab Fillet Radius | 2 mm | 0.5 – 5 |
| Level 1 Pocket Size | 60 mm | 50 – 65 |
| Level 1 Pocket Depth | 2 mm | 1 – 5 |
| Level 2 Pocket Size | 54 mm | 40 – 59 |
| Level 2 Pocket Depth | 1.5 mm | 0.5 – 3 |
| Magnet Hole Diameter | 10.4 mm | 5 – 15 |
| Magnet Hole Depth | 3.2 mm | 1 – 5 |
| Magnet Offset from Center | 16 mm | 10 – 25 |
| Cover Plate Seat Size | 47 mm | 30 – 60 |
| Cover Plate Seat Depth | 1 mm | 0.5 – 3 |
| External Edge Fillet | 1 mm | 0.1 – 3 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Spur Gearbox
design gearbox