Brackets and mounts
80/20 Lead-Screw Carriage with Clevis Brackets and Bucket
- Bounding box
- 60.0 × 130.0 × 65.0 mm
- Engine
- Precision B-rep
- Parameters
- 35
- Published
- November 11, 2026
Download
Free to download and use. See the terms.
The prompt
Create a parametric 3D model of an 80/20 aluminum extrusion sliding carriage with a central T8 lead screw nut housing, two clevis pivot mounting brackets on the top edge, and an attached sheet metal bucket.
Parameters
| Name | Value | Range |
|---|---|---|
| Plate Width (X) | 60 mm | 30 – 160 |
| Plate Length (Y) | 90 mm | 40 – 220 |
| Plate Thickness | 12 mm | 5 – 30 |
| Extrusion Relief Channel Width | 21 mm | 8 – 80 |
| Extrusion Relief Channel Depth | 6 mm | 1 – 20 |
| Mounting Hole Dia | 5.5 mm | 2 – 12 |
| Mounting Hole Spacing X | 40 mm | 10 – 140 |
| Mounting Hole Spacing Y | 52 mm | 20 – 180 |
| Housing Length (along screw X) | 34 mm | 16 – 80 |
| Housing Width (Y) | 34 mm | 16 – 80 |
| Housing Height | 30 mm | 12 – 80 |
| Lead Screw Bore Dia | 8.4 mm | 4 – 24 |
| Anti-Backlash Nut Pocket Dia | 22.2 mm | 8 – 50 |
| Nut Pocket Depth | 24 mm | 5 – 60 |
| Housing Corner Fillet | 3 mm | 0.5 – 6 |
| Bracket Spacing (X) | 36 mm | 20 – 120 |
| Bracket Position (Y) | 35 mm | 0 – 90 |
| Base Width | 22 mm | 12 – 50 |
| Base Depth | 18 mm | 8 – 40 |
| Base Thickness | 6 mm | 3 – 20 |
| Fork Tab Thickness | 6 mm | 2 – 16 |
| Fork Tab Depth | 12 mm | 6 – 36 |
| Fork Tab Height | 22 mm | 8 – 60 |
| Clevis Gap | 10 mm | 4 – 40 |
| Pivot Pin Hole Dia | 6 mm | 2 – 16 |
| Pivot Pin Height Above Plate | 20 mm | 6 – 60 |
| Bucket Width (X) | 60 mm | 20 – 160 |
| Bucket Depth (Y) | 40 mm | 15 – 120 |
| Bucket Height | 35 mm | 10 – 120 |
| Sheet Thickness | 2 mm | 0.5 – 6 |
| Top Flange Length | 14 mm | 5 – 40 |
| Rivet Hole Dia | 4 mm | 1.5 – 10 |
| Rivet Count | 3 ea | 1 – 7 |
| Rivet Spacing | 20 mm | 5 – 60 |
| Rivet Inset From Plate Edge | 5 mm | 2 – 20 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
SG90 2-DOF Robotic Arm Assembly
"Design a compact, 3D-printable 2-DOF robotic arm specifically for a mobile library robot. The arm should consist of a rotating base joint, a lower link, an upper link, and a simpl