Brackets and mounts
8-Plant Kratky Hydroponic Reservoir
- Bounding box
- 400.0 × 280.0 × 220.0 mm
- Engine
- Precision B-rep
- Parameters
- 11
- Published
- November 17, 2026
Download
Free to download and use. See the terms.
The prompt
Conceptual 3D model of an eight-plant passive Kratky hydroponic system: rectangular wooden reservoir, removable foam lid with eight evenly spaced holes in a 4-by-2 layout, eight separate hollow plant holders with rims and drainage openings, and a separate visual block for the initial nutrient solution. The initial water surface reaches the holder bottoms; as the level drops, an air gap forms for Kratky roots. No air pump is included. Dimensions are adjustable.
Parameters
| Name | Value | Range |
|---|---|---|
| Reservoir length | 400 mm | 300 – 600 |
| Reservoir width | 280 mm | 220 – 400 |
| Reservoir height | 200 mm | 150 – 300 |
| Wood wall thickness | 10 mm | 6 – 20 |
| Foam lid thickness | 20 mm | 10 – 35 |
| Eight lid holes | 56 mm | 45 – 70 |
| Cup body diameter | 50 mm | 40 – 54 |
| Cup top rim diameter | 64 mm | 58 – 75 |
| Cup depth | 75 mm | 50 – 110 |
| Cup wall thickness | 3 mm | 2 – 5 |
| Initial nutrient depth | 135 mm | 50 – 150 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
JZX100 Gas Cap Holder
can you make a gas cap holder for a jzx100 chaser. i want you to refer to the image and make a cad very close to the picture
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
