Enclosures and housings
64mm Water Chamber Sketch Prototype
- Bounding box
- 64.0 × 64.0 × 16.0 mm
- Engine
- Precision B-rep
- Parameters
- 13
- Published
- November 19, 2026
Download
Free to download and use. See the terms.
The prompt
Concept CAD prototype from sketch: 64x64 square water chamber, 12.5mm internal height, broad alternating flow channels directing water across grouped fin teeth, upper-left inlet and lower-right outlet. Fins and flow dividers are illustrative; exact fin pitch and flow resistance are not measured/validated.
Parameters
| Name | Value | Range |
|---|---|---|
| Chamber footprint | 64 mm | 50 – 80 |
| Internal clear height | 12.5 mm | 8 – 20 |
| Overall assembled height | 14.5 mm | 14 – 15 |
| Bottom plate thickness | 1 mm | 0.8 – 2 |
| Lid thickness | 1 mm | 0.8 – 2 |
| Outer wall thickness | 1.5 mm | 1 – 2.5 |
| Channel divider thickness | 1.2 mm | 0.8 – 2 |
| Heatsink square | 40 mm | 30 – 45 |
| Fin height | 11 mm | 8 – 12 |
| Port diameter | 6 mm | 4 – 8 |
| Port length | 6 mm | 3 – 10 |
| End-turn gap | 7 mm | 4 – 10 |
| Illustrative fin count | 14 | 8 – 20 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Lego 1x4 Technic Brick
Create a precise 3D CAD model of a single 1x4 Lego Technic-compatible brick designed for STEM robotics. The main rectangular body must have exact dimensions: 31.8 mm in length, 7.8
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
Axial Turbine Rotor
Create a 3D-printable axial turbine rotor. Units mm. OD 34.15, hub OD 16, shaft hole Ø10. 12 equally spaced curved blades, radial height 9.075, chord 6.5, max thickness 0.65. Blade
