Enclosures and housings
6-Pin Male Automotive Connector Housing
- Bounding box
- 22 × 26 × 15.3 mm
- Engine
- 3D Printing B-rep
- Parameters
- 15
- Published
- November 7, 2026
Download
Free to download and use. See the terms.
The prompt
Design a 6-pin male rectangular automotive connector housing. Overall body size 22mm x 16mm x 14mm. Features 6 inner rectangular pass-through slots arranged in 2 rows of 3, each slot 6.5mm wide by 3.0mm high. Add a 10mm extended hollow shroud on the front face (wall thickness 1.0mm) to act as a protective weather skirt. On top of the main body, add a 4mm wide flex locking tab with a small snap retention catch.
Parameters
| Name | Value | Range |
|---|---|---|
| Body width | 22 mm | 10 – 60 |
| Body depth | 16 mm | 8 – 60 |
| Body height | 14 mm | 6 – 50 |
| Skirt length | 10 mm | 3 – 40 |
| Skirt wall thickness | 1 mm | 0.8 – 3 |
| Slot width | 6.5 mm | 2 – 12 |
| Slot height | 3 mm | 1 – 8 |
| Row spacing, centre to centre | 6 mm | 3 – 12 |
| Tab width | 4 mm | 2 – 10 |
| Tab thickness | 1.5 mm | 0.8 – 3 |
| Flex gap under the tab | 1 mm | 0.4 – 3 |
| Side clearance in the relief slot | 0.8 mm | 0.4 – 2 |
| Fixed hinge length at the rear | 3 mm | 1.5 – 8 |
| Snap catch height | 1.3 mm | 0.6 – 3 |
| Snap catch ramp length | 2.5 mm | 1 – 6 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Default Spur Gear
La costruzione dovrà prevedere i seguenti spazi: 1. Zona Giorno (Piano Terra)-Totale:~110 mg • Ingresso / Disimpegno con guardaroba: 10 mg • Soggiorno / Area Living: 40 mq (ampio,