Enclosures and housings
6-Cell Salt-Water Battery Rack, Windowed Front/Back + Lid
- Bounding box
- 177.0 × 127.0 × 134.0 mm
- Engine
- Precision B-rep
- Parameters
- 22
- Published
- October 14, 2026
Download
Free to download and use. See the terms.
The prompt
Create a parametric 3D model for a 6-cell salt-water battery rack with partial front/back walls and a matching lid. Part 1: Main Container. The overall inner dimensions are 160mm length, 110mm width, and 120mm height with a 4mm wall thickness. The left and right side walls are completely solid panels. The front and back faces feature a large central horizontal cutout for visibility, but they include a 20mm tall solid mini-wall at the bottom and a 20mm solid mini-wall at the top. The base floor has a 2x3 grid of 6 circular pockets (34mm diameter, 8mm deep). At a height of 60mm, there is a middle horizontal plate with 6 aligned 34mm through-holes spanning between the solid side walls. Part 2: Shoebox Lid. A separate matching overlapping solid lid with a 4mm wall thickness and a 15mm downward rim, featuring a 0.5mm clearance gap for a friction fit over the top of the box. Include two 5mm U-shaped notches on one side for wire exits.
Parameters
| Name | Value | Range |
|---|---|---|
| Inner Length | 160 mm | 60 – 400 |
| Inner Width | 110 mm | 40 – 300 |
| Inner Height | 120 mm | 40 – 300 |
| Wall Thickness | 4 mm | 2 – 10 |
| Floor Thickness | 10 mm | 6 – 25 |
| Bottom Mini-Wall Height (front/back) | 20 mm | 5 – 60 |
| Top Mini-Wall Height (front/back) | 20 mm | 5 – 60 |
| Cell Pocket Diameter | 34 mm | 10 – 60 |
| Cell Pocket Depth | 8 mm | 1 – 20 |
| Cell Pitch (X, 3 columns) | 50 mm | 20 – 150 |
| Cell Pitch (Y, 2 rows) | 55 mm | 20 – 120 |
| Middle Plate Height Above Floor | 60 mm | 10 – 200 |
| Middle Plate Thickness | 4 mm | 2 – 12 |
| Middle Plate Hole Diameter | 34 mm | 10 – 60 |
| Lid Friction Clearance | 0.5 mm | 0.1 – 2 |
| Lid Wall Thickness | 4 mm | 2 – 10 |
| Lid Top Thickness | 4 mm | 2 – 12 |
| Lid Rim Height | 15 mm | 5 – 40 |
| Wire Notch Width | 5 mm | 2 – 20 |
| Wire Notch Depth | 8 mm | 2 – 30 |
| Wire Notch Spacing | 30 mm | 5 – 80 |
| Corner Fillet Radius | 2 mm | 0.5 – 4 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no