Enclosures and housings
6-Cell Salt-Water Battery Enclosure Assembly
- Bounding box
- 173.0 × 123.0 × 192.0 mm
- Engine
- Precision B-rep
- Parameters
- 26
- Published
- October 14, 2026
Download
Free to download and use. See the terms.
The prompt
Create a parametric multi-body 3D model for a 6-cell salt-water battery assembly with an overall tightly enclosed outer size of 173mm length, 123mm width, and 192mm height. Part 1: Main Rack Structure. Inner dimensions are 160mm x 110mm x 120mm with a 4mm wall thickness. Solid left/right panels. Front/back faces have a central visibility cutout with 20mm mini-walls at the top and bottom. The base floor has a 2x3 grid of 6 circular pockets (34mm diameter, 8mm deep). A middle stabilization plate with 6 through-holes sits at 60mm height. Part 2: 6 Battery Cells. 6 independent cylinders with an outer diameter of 33.4mm and an extended height of 180mm, arranged in a 2x3 grid, nesting into the bottom pockets and protruding 60mm above the main rack. Part 3: Lower Fixed Extension (Bottom half of cover). A 35mm tall rectangular sleeve that fits firmly over the top of the main rack, partially enclosing the lower section of the protruding pipes. Part 4: Mini Upper Lid (Top half of cover). A separate, removable mini shoebox-style lid with a 4mm wall thickness and a 35mm downward rim. It features a 0.5mm clearance gap to slide smoothly over the Lower Fixed Extension, completing the 192mm total assembly height. Include two 5mm U-shaped notches on the bottom edge of its rim for wire exits.
Parameters
| Name | Value | Range |
|---|---|---|
| Rack Outer Length (X) | 168 mm | 150 – 190 |
| Rack Outer Width (Y) | 118 mm | 100 – 140 |
| Rack Height | 120 mm | 80 – 150 |
| Wall Thickness | 4 mm | 2 – 8 |
| Base Floor Thickness | 8 mm | 4 – 14 |
| Mini-Wall Height (top/bottom) | 20 mm | 8 – 40 |
| Visibility Cutout Length | 130 mm | 60 – 158 |
| Floor Pocket Diameter | 34 mm | 30 – 40 |
| Stabilization Plate Height (Z) | 60 mm | 20 – 110 |
| Stabilization Plate Thickness | 4 mm | 2 – 10 |
| Plate Clearance Hole Diameter | 34.5 mm | 30 – 42 |
| Cell Pitch X (3 columns) | 55 mm | 36 – 60 |
| Cell Pitch Y (2 rows) | 36 mm | 34 – 55 |
| Cell Outer Diameter | 33.4 mm | 20 – 40 |
| Cell Height | 180 mm | 120 – 200 |
| Lower Extension Height | 35 mm | 10 – 60 |
| Lower Extension Wall | 4 mm | 2 – 8 |
| Lid Outer Length (X) | 173 mm | 155 – 200 |
| Lid Outer Width (Y) | 123 mm | 105 – 145 |
| Lid Overall Height | 37 mm | 15 – 70 |
| Lid Wall Thickness | 4 mm | 2 – 8 |
| Lid Top Plate Thickness | 4 mm | 2 – 10 |
| Lid-to-Extension Clearance | 0.5 mm | 0.1 – 2 |
| Wire Notch Width | 5 mm | 2 – 12 |
| Wire Notch Height | 6 mm | 3 – 15 |
| Wire Notch Offset From Center | 30 mm | 0 – 70 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no