Mechanical parts
550mm Square Hollow Base Support Rail
- Bounding box
- 40.0 × 40.0 × 550.0 mm
- Engine
- Precision B-rep
- Parameters
- 3
- Published
- November 21, 2026
Download
Free to download and use. See the terms.
The prompt
One separate hollow square steel tube base support rail for a synchronized screw-lift workstation. Length 550 mm, external cross-section 40 x 40 mm, uniform 3 mm wall thickness, internal clear section 34 x 34 mm. Straight rectangular hollow square tube with clean square-cut open ends, flat upper and lower surfaces. Blue industrial painted metal appearance is an assembly appearance. One rail only, to be duplicated for the opposite side. Units mm, STEP for Autodesk Fusion 360.
Parameters
| Name | Value | Range |
|---|---|---|
| Rail length | 550 mm | 550 – 550 |
| External square section | 40 mm | 40 – 40 |
| Wall thickness | 3 mm | 3 – 3 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →SWYFT Reference-Style 3.5 inch Mold 16mm
One-piece open casting mold following the user's uploaded SWYFT wheel design brief. Outside diameter including rounded tabs: 88.9 mm. Cavity thickness: 16 mm. 12 curved spokes. Cir
Stepped Shaft with Keyway
Create a stepped cylindrical shaft in C45 steel, length 120 mm, diameter 30 mm, featuring an 8x7 mm parallel keyway slot."
Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
Two-Joint Robotic Arm with Parallel Gripper
i want a 2 joint robotic arm with parallel gripper simple design. Servo-Base: smart/serial-bus servo, true 360° positional control. Turret rides on a bearing so the servo only driv
