Enclosures and housings
5-Dart Nerf Magazine
- Bounding box
- 44 × 24 × 94.9 mm
- Engine
- 3D Printing B-rep
- Parameters
- 15
- Published
- November 6, 2026
Download
Free to download and use. See the terms.
The prompt
give me a 5 vullet nerf magazin that looks like this but less detailed create a x shaped spring a sliding bottom plate to go with it and a pusher that sits on top of the spring keeping the bullets stable and the pusher should move on some rails in the mag
Parameters
| Name | Value | Range |
|---|---|---|
| Body height | 90 mm | 50 – 200 |
| Body width | 40 mm | 24 – 80 |
| Body depth | 20 mm | 14 – 60 |
| Wall thickness | 3 mm | 1.2 – 6 |
| Vertical corner radius | 4 mm | 1 – 10 |
| Rib band height | 4 mm | 2 – 10 |
| Installed spring height | 36 mm | 12 – 70 |
| Spring span across magazine | 26 mm | 10 – 34 |
| Spring strip thickness | 1.5 mm | 1 – 3 |
| Plate thickness | 5 mm | 3 – 10 |
| Plate lip around body | 2 mm | 1 – 6 |
| Slide tab height | 6 mm | 3 – 12 |
| Pusher thickness | 4 mm | 2 – 10 |
| Dart cradle radius | 6 mm | 3 – 12 |
| Sliding clearance | 0.3 mm | 0.1 – 0.6 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Default Spur Gear
La costruzione dovrà prevedere i seguenti spazi: 1. Zona Giorno (Piano Terra)-Totale:~110 mg • Ingresso / Disimpegno con guardaroba: 10 mg • Soggiorno / Area Living: 40 mq (ampio,