Enclosures and housings
4WD Rear Drawer System with Drawer Slides
- Bounding box
- 1000.0 × 900.0 × 430.0 mm
- Engine
- Precision B-rep
- Parameters
- 25
- Published
- November 6, 2026
Download
Free to download and use. See the terms.
The prompt
make the 2 internal draws 150mm high, and have them side by side to open one side only. Add draw sliders to all draws.
Parameters
| Name | Value | Range |
|---|---|---|
| Panel Thickness | 12 mm | 6 – 24 |
| Carcass Width | 1000 mm | 600 – 1600 |
| Carcass Depth | 900 mm | 400 – 1400 |
| Carcass Height | 430 mm | 200 – 900 |
| Slide Thickness | 12.7 mm | 6 – 30 |
| Slide Rail Height | 35 mm | 15 – 80 |
| Lower Drawer Width | 505 mm | 200 – 900 |
| Lower Drawer Depth | 780 mm | 200 – 1200 |
| Lower Drawer Height | 100 mm | 40 – 300 |
| Fridge Frame Width | 500 mm | 100 – 900 |
| Fridge Frame Depth | 760 mm | 200 – 1200 |
| Fridge Frame Height | 110 mm | 30 – 400 |
| Fridge Drawer Width | 440 mm | 100 – 900 |
| Fridge Drawer Depth | 700 mm | 100 – 1100 |
| Fridge Drawer Height | 25 mm | 15 – 150 |
| Main Drawer Width | 459 mm | 150 – 900 |
| Main Drawer Depth | 850 mm | 200 – 1200 |
| Main Drawer Height | 280 mm | 100 – 600 |
| Internal Drawer Width | 220 mm | 80 – 500 |
| Internal Drawer Slide Length | 390 mm | 100 – 600 |
| Internal Drawer Height | 150 mm | 50 – 400 |
| Gap Between Internal Drawers | 40 mm | 5 – 200 |
| Rear Compartment Width | 300 mm | 50 – 800 |
| Rear Compartment Depth | 300 mm | 50 – 800 |
| Rear Compartment Height | 180 mm | 30 – 400 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Default Spur Gear
La costruzione dovrà prevedere i seguenti spazi: 1. Zona Giorno (Piano Terra)-Totale:~110 mg • Ingresso / Disimpegno con guardaroba: 10 mg • Soggiorno / Area Living: 40 mq (ampio,