Enclosures and housings
4WD Rear Drawer System
- Bounding box
- 1000.0 × 900.0 × 300.0 mm
- Engine
- Precision B-rep
- Parameters
- 22
- Published
- November 6, 2026
Download
Free to download and use. See the terms.
The prompt
Slide draws for the rear of a 4wd, must have 100mm high draw with a frame above for a fridge draw that's 440mm wide and 25mm high. Next to that will be one draw, when this draw is out, it will have 2 draws that open sideways, and one large section at the rear, draws and compartment within a single pull out draw. The overall size will be 1000mm wide and 900 deep.
Parameters
| Name | Value | Range |
|---|---|---|
| Carcass Width | 1000 mm | 700 – 1600 |
| Carcass Depth | 900 mm | 500 – 1400 |
| Carcass Height | 300 mm | 150 – 600 |
| Panel Thickness | 12 mm | 6 – 20 |
| Lower Drawer Width | 524 mm | 400 – 700 |
| Lower Drawer Depth | 850 mm | 400 – 1200 |
| Lower Drawer Height | 100 mm | 60 – 250 |
| Fridge Frame Width | 440 mm | 300 – 640 |
| Fridge Frame Depth | 850 mm | 400 – 1200 |
| Fridge Frame Height | 25 mm | 15 – 80 |
| Fridge Tray Width | 410 mm | 280 – 600 |
| Fridge Tray Depth | 800 mm | 350 – 1150 |
| Fridge Tray Height | 25 mm | 15 – 80 |
| Main Drawer Width | 440 mm | 300 – 600 |
| Main Drawer Depth | 850 mm | 400 – 1200 |
| Main Drawer Height | 275 mm | 150 – 450 |
| Side Drawer Width | 200 mm | 120 – 300 |
| Side Drawer Depth | 400 mm | 200 – 600 |
| Side Drawer Height | 100 mm | 60 – 250 |
| Rear Compartment Width | 416 mm | 200 – 600 |
| Rear Compartment Depth | 350 mm | 150 – 700 |
| Rear Compartment Height | 263 mm | 100 – 450 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Default Spur Gear
La costruzione dovrà prevedere i seguenti spazi: 1. Zona Giorno (Piano Terra)-Totale:~110 mg • Ingresso / Disimpegno con guardaroba: 10 mg • Soggiorno / Area Living: 40 mq (ampio,