Enclosures and housings
4in VoCore DDU – flared, hooded LED dash (v2)
- Bounding box
- 126.4 × 111.8 × 42.0 mm
- Engine
- Precision B-rep
- Parameters
- 41
- Published
- November 14, 2026
Download
Free to download and use. See the terms.
The prompt
v2: 4" VoCore DDU enclosure in the PDU7 style — side flares for the side LEDs that slim back to the base, 12 top LEDs, 4 per side, hood following the outline, laid out around a future custom LED/USB board. Screen fit and Asetek ears carried over from the user's proven enclosure.
Parameters
| Name | Value | Range |
|---|---|---|
| Screen pocket width | 96.4 mm | 90 – 105 |
| Screen pocket height | 57.5 mm | 52 – 65 |
| Viewing window width | 90 mm | 80 – 96 |
| Viewing window height | 55 mm | 45 – 57 |
| Window X offset | 2 mm | -4 – 4 |
| Front lip thickness | 2 mm | 1.2 – 4 |
| Body depth | 17 mm | 14 – 30 |
| Screen hold-down block length | 11.26 mm | 5 – 20 |
| Screw pilot diameter | 2.6 mm | 2 – 4.2 |
| Cable notch X | 39.5 mm | -40 – 45 |
| Top half width | 56 mm | 52 – 62 |
| Flare half width | 60 mm | 56 – 68 |
| Base half width | 52.1 mm | 52.1 – 58 |
| Top edge (above centre) | 42 mm | 38 – 55 |
| Bottom edge (below centre) | 34.65 mm | 32 – 45 |
| Flare top | 30.5 mm | 20 – 36 |
| Flare bottom | 6.5 mm | -10 – 15 |
| Flare transition height | 3.5 mm | 1 – 8 |
| Outline corner fillet | 1.5 mm | 0.5 – 3 |
| Outer wall | 1.6 mm | 1.2 – 3 |
| Top wall | 3 mm | 2 – 5 |
| Top screw X from centre | 20 mm | 10 – 40 |
| Top screw height | 38.5 mm | 36 – 50 |
| LED cell depth | 2 mm | 1 – 5 |
| LED window diameter | 3 mm | 2 – 4 |
| LED cell size | 4.4 mm | 3.5 – 5.5 |
| Top LED count | 12 | 6 – 16 |
| Top LED pitch | 5.83 mm | 5 – 8 |
| Top LED row height | 33.2 mm | 31 – 45 |
| LEDs per side | 4 | 1 – 5 |
| Side LED pitch | 5.9 mm | 5 – 10 |
| Side LED centre height | 18.3 mm | 5 – 28 |
| Side LED offset from centre | 55.5 mm | 53 – 64 |
| Board arm bottom | 5 mm | -5 – 15 |
| Board top edge | 35.3 mm | 33 – 45 |
| Hood overhang | 22 mm | 8 – 40 |
| Hood thickness | 3 mm | 2 – 5 |
| Cheek bottom height | 6.5 mm | -30 – 30 |
| Hood front drop | 4 mm | 0 – 15 |
| Hood fit clearance | 0.2 mm | 0 – 0.6 |
| Back plate thickness | 3 mm | 2 – 5 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Default Spur Gear
La costruzione dovrà prevedere i seguenti spazi: 1. Zona Giorno (Piano Terra)-Totale:~110 mg • Ingresso / Disimpegno con guardaroba: 10 mg • Soggiorno / Area Living: 40 mq (ampio,