Enclosures and housings
4-Spoke Flywheel 150 mm
- Bounding box
- 150.0 × 150.0 × 15.0 mm
- Engine
- Precision B-rep
- Parameters
- 8
- Published
- November 5, 2026
Download
Free to download and use. See the terms.
The prompt
Create a precise, dimensionally accurate 3D CAD model of a mechanical flywheel for 3D printing. IMPORTANT: All dimensions must be in MILLIMETERS (mm). The model must be created at an exact 1:1 real-world scale. Do NOT resize, approximate, or modify any specified dimensions. EXACT DESIGN SPECIFICATIONS: 1. OUTER RIM: - Outer diameter: EXACTLY 150 mm. - Inner diameter: EXACTLY 110 mm. - Axial thickness: EXACTLY 15 mm. - Circular and symmetrical rim. 2. SPOKES: - Exactly 4 spokes. - Equally spaced at 90-degree intervals. - Spoke width: EXACTLY 8 mm. - All four spokes must connect the central hub to the outer rim. - Spokes must be symmetrical and structurally connected. 3. CENTRAL HUB: - Outer diameter: EXACTLY 25 mm. - Central shaft hole: EXACTLY 3 mm diameter. - Shaft hole must pass completely through the hub. - Shaft hole must be perfectly concentric with the flywheel. 4. MODEL REQUIREMENTS: - Create one complete, unified solid body. - No disconnected components. - No unnecessary holes or decorative features. - Maintain the exact specified dimensions. - Ensure the model is watertight and manifold. - Use clean mechanical geometry suitable for FDM 3D printing. 5. EXPORT REQUIREMENTS: - Export a high-resolution STL file. - Also provide a STEP (.STP) file for further CAD editing. - Preserve millimeter units during export. - Ensure the exported model maintains the exact 150 mm outer diameter. - Do not automatically scale the model. Before exporting, verify all dimensions and confirm that the model matches every specification above. The final output must be a printable 3D mechanical flywheel, not a rendering or a 2D drawing.
Parameters
| Name | Value | Range |
|---|---|---|
| Rim Outer Diameter | 150 mm | 60 – 300 |
| Rim Inner Diameter | 110 mm | 30 – 250 |
| Axial Thickness | 15 mm | 4 – 40 |
| Spoke Count | 4 count | 3 – 12 |
| Spoke Width | 8 mm | 2 – 30 |
| Spoke Junction Overlap | 2 mm | 0.5 – 5 |
| Hub Outer Diameter | 25 mm | 8 – 80 |
| Shaft Bore Diameter | 3 mm | 1 – 20 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Default Spur Gear
La costruzione dovrà prevedere i seguenti spazi: 1. Zona Giorno (Piano Terra)-Totale:~110 mg • Ingresso / Disimpegno con guardaroba: 10 mg • Soggiorno / Area Living: 40 mq (ampio,