Brackets and mounts
4-Medal Clover Display Stand (CIRCUITO RURAL BARRA MANSA)
- Bounding box
- 185.0 × 115.0 × 182.4 mm
- Engine
- Precision B-rep
- Parameters
- 20
- Published
- November 17, 2026
Download
Free to download and use. See the terms.
The prompt
Create a 3D CAD model of a display stand for **4 circular medals, each 80 mm in diameter**, arranged in a four-leaf clover pattern (top, bottom, left, and right), with a central overlapping area and complementary cutouts that allow the medals to interlock. The structure must feature **4 recessed front cavities**, separated by S-shaped curved dividers, creating a pinwheel-like design. Each medal must physically fit into its own recessed cavity rather than simply resting on a flat surface. The dividers must follow the medal contours and form functional three-dimensional slots. Include 4 rectangular openings for the medal ribbons, rear clips to secure them, and a sturdy rectangular base with chamfered edges, triangular reinforcements, and a 15° backward tilt. Initial dimensions: 145 mm wide, 85 mm deep, and 163 mm tall, adjustable according to the actual medal geometry. The base must be detachable, with a secure connection to the main structure. Use a professional sports trophy aesthetic, featuring a matte black finish with olive-green accents and the inscription **"CIRCUITO RURAL BARRA MANSA"** on the front of the base. The design must be functional, parametric, and optimized for FDM 3D printing on the **Anycubic Kobra X**, using PLA or PETG. Deliver **3MF, STEP, and editable CAD files**, along with front, rear, side, and isometric views. **ABSOLUTE PRIORITY:** Create four genuinely recessed front compartments with S-shaped dividers, respecting the interlocking geometry of the medals. Do not replace these compartments with decorative lines or a flat plate. Since no detailed
Parameters
| Name | Value | Range |
|---|---|---|
| Display body width | 168 mm | 145 – 185 |
| Display body height | 168 mm | 145 – 185 |
| Display body thickness | 24 mm | 16 – 32 |
| Medal recess diameter | 80.8 mm | 70 – 95 |
| Recess depth | 8 mm | 4 – 14 |
| Recess edge margin | 4 mm | 2 – 10 |
| Ribbon opening width | 26 mm | 12 – 40 |
| Ribbon opening length | 12 mm | 6 – 24 |
| Base width | 185 mm | 150 – 230 |
| Base depth | 115 mm | 80 – 160 |
| Base height | 25 mm | 12 – 40 |
| Backward tilt | 15 deg | 0 – 30 |
| Socket clearance | 0.6 mm | 0.2 – 2 |
| Body insertion depth | 8 mm | 3 – 18 |
| Gusset height | 34 mm | 10 – 60 |
| Gusset thickness | 8 mm | 3 – 16 |
| Clip width | 20 mm | 10 – 32 |
| Clip thickness | 6 mm | 3 – 14 |
| Clip height | 12 mm | 6 – 24 |
| Clip ribbon slot width | 8 mm | 3 – 16 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
JZX100 Gas Cap Holder
can you make a gas cap holder for a jzx100 chaser. i want you to refer to the image and make a cad very close to the picture
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
