Enclosures and housings
4-Bottle Skincare Organizer Base
- Bounding box
- 182.0 × 50.0 × 25.0 mm
- Engine
- Precision B-rep
- Parameters
- 7
- Published
- October 22, 2026
Download
Free to download and use. See the terms.
The prompt
Design a 3D-printable organizer base for 4 cylindrical skincare bottles arranged in a single straight row. All units in millimeters. Export as a single watertight (manifold) STL. OVERALL SHAPE - A rectangular block, 182 mm long (X axis) x 50 mm wide (Y axis) x 25 mm tall (Z axis), sitting flat on the XY plane (bottom face at Z=0). - The block is centered on the origin in X and Y. - The 4 vertical corners are rounded with a 12 mm radius. - The top and bottom outer edges have a 2 mm fillet. BOTTLE POCKETS - 4 circular pockets, each 34 mm in diameter, arranged in one straight line along the X axis. - Pocket centers are at Y = 0 and X = -66, -22, +22, +66 mm. - Center-to-center spacing is exactly 44 mm. This leaves a 10 mm solid wall between neighboring pockets. - Each pocket is 22 mm deep, measured from the flat top face, with a flat bottom. This leaves a solid 3 mm base under every pocket. Pockets are blind holes, not through-holes. - Pocket walls are perfectly vertical, with no taper below the rim. - The top rim of each pocket has a 2 mm fillet (smooth rounded lead-in). The 34 mm diameter and 22 mm depth stay unchanged. The fillet only widens the opening at the top. - Apply the rim fillets after cutting the pockets. - Leave an 8 mm solid wall between each pocket and the outer edge of the block on every side (ends and long sides). CONSTRAINTS - One single solid body, no separate parts. - Flat bottom with no overhangs or supports needed for printing. - No text, logos, or decorative features. - Do not change the stated dimensions. If any value conflicts, prioritize: pocket diameter (34 mm), pocket spacing (44 mm center-to-center), overall height (25 mm).
Parameters
| Name | Value | Range |
|---|---|---|
| Overall Length (X) | 182 mm | 120 – 300 |
| Overall Width (Y) | 50 mm | 40 – 120 |
| Overall Height (Z) | 25 mm | 12 – 60 |
| Pocket Count | 4 pcs | 1 – 8 |
| Pocket Diameter | 34 mm | 10 – 60 |
| Pocket Depth | 22 mm | 2 – 25 |
| Pocket Center Spacing | 44 mm | 15 – 90 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no