Enclosures and housings
3WD Electric Drift Trike
- Bounding box
- 1725.1 × 1050.0 × 700.0 mm
- Engine
- Precision B-rep
- Parameters
- 27
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
Building a DIY 3-wheel drive (3WD) electric drift trike is an ambitious project. Most drift trikes use a single motor on the front or a rear axle; going 3WD means you're looking for insane torque and AWD-style recovery out of a slide. Here is a blueprint to get your build off the ground. 1. The Power Train (The "3WD" Secret) To power all three wheels, you'll need a hub motor setup. Using chains for 3WD is a mechanical nightmare.
Parameters
| Name | Value | Range |
|---|---|---|
| Frame Length | 1400 mm | 800 – 2000 |
| Frame Width | 800 mm | 400 – 1200 |
| Frame Height | 400 mm | 200 – 600 |
| Frame Tube OD | 30 mm | 20 – 50 |
| Front Wheel Diameter | 200 mm | 100 – 400 |
| Front Wheel Width | 100 mm | 50 – 200 |
| Rear Wheel Diameter | 250 mm | 150 – 500 |
| Rear Wheel Width | 120 mm | 60 – 200 |
| Swingarm Length | 100 mm | 0 – 300 |
| Steering Column Height | 500 mm | 300 – 700 |
| Steering Column Diameter | 40 mm | 25 – 60 |
| Handlebar Width | 600 mm | 400 – 800 |
| Handlebar Diameter | 25 mm | 15 – 40 |
| Steering Knuckle Diameter | 30 mm | 20 – 50 |
| Seat Width | 400 mm | 200 – 500 |
| Seat Depth | 350 mm | 150 – 450 |
| Seat Height | 200 mm | 100 – 300 |
| Seat Offset X | -350 mm | -600 – 0 |
| Battery Length | 300 mm | 150 – 400 |
| Battery Width | 200 mm | 100 – 300 |
| Battery Height | 150 mm | 100 – 250 |
| Battery Offset X | -600 mm | -800 – -300 |
| Foot Peg Length | 150 mm | 100 – 200 |
| Foot Peg Diameter | 25 mm | 15 – 40 |
| Foot Peg X | -100 mm | -300 – 0 |
| Foot Peg Y Offset | 450 mm | 350 – 500 |
| Foot Peg Z | 200 mm | 100 – 300 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no