Brackets and mounts
320x80 Flexible LED Matrix Enclosure
- Bounding box
- 334 × 38 × 94 mm
- Engine
- 3D Printing B-rep
- Parameters
- 20
- Published
- November 20, 2026
Download
Free to download and use. See the terms.
The prompt
Two-part 3D printable enclosure for a 320mm by 80mm flexible LED matrix. Part 1 (Main Body): hollow rectangular box, outer dimensions 334mm length, 94mm height, 38mm depth, 2.5mm wall thickness, 5mm filleted vertical corners. Front face has a centered rectangular cutout 321mm by 81mm. Inside, 3mm behind the front face, there is a solid internal backing plate (329mm by 89mm) with two 8mm wire pass-through holes to support the flexible LED matrix. Back of the box is open with a 2mm inner lip. Part 2 (Back Lid): flat snap-fit cover plate 328.6mm by 88.6mm, 2.5mm thick, with four circular panel-mount holes arranged horizontally in a row with 25mm spacing: first hole 11.8mm diameter (for DC 5.5x2.1 jack), second hole 12.2mm diameter (for panel-mount USB-C), third and fourth holes 8.4mm diameter each (for stereo RCA jacks).
Parameters
| Name | Value | Range |
|---|---|---|
| Enclosure length | 334 mm | 150 – 600 |
| Enclosure height | 94 mm | 50 – 250 |
| Enclosure depth | 38 mm | 15 – 120 |
| Wall thickness | 2.5 mm | 1.2 – 6 |
| Vertical corner fillet | 5 mm | 0 – 20 |
| Front window width | 321 mm | 50 – 580 |
| Front window height | 81 mm | 30 – 200 |
| Backing plate setback from front face | 3 mm | 2 – 12 |
| Backing plate thickness | 2.5 mm | 1.2 – 6 |
| Wire pass-through diameter | 8 mm | 3 – 20 |
| Wire hole X offset from centre | 120 mm | 10 – 150 |
| Wire hole height above bottom | 22 mm | 8 – 60 |
| Rear lip width | 2 mm | 1 – 6 |
| Rear lip depth | 3 mm | 1 – 8 |
| Lid clearance per side | 0.2 mm | 0.1 – 0.6 |
| Lid thickness | 2.5 mm | 1.2 – 6 |
| Connector hole pitch | 25 mm | 10 – 60 |
| DC 5.5x2.1 jack hole | 11.8 mm | 6 – 20 |
| USB-C jack hole | 12.2 mm | 6 – 20 |
| RCA jack hole | 8.4 mm | 5 – 16 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
JZX100 Gas Cap Holder
can you make a gas cap holder for a jzx100 chaser. i want you to refer to the image and make a cad very close to the picture
Micro RC Airplane Frame
Create a lightweight 3D-printable indoor micro RC airplane frame. The fuselage is a hollow rectangular boom 200 mm long, 3 mm wide, and 3 mm tall, with an open U-shaped electronics
