Brackets and mounts
3-in-1 MagSafe Charging Station
- Bounding box
- 340 × 140.0 × 108.0 mm
- Engine
- 3D Printing B-rep
- Parameters
- 43
- Published
- November 4, 2026
Download
Free to download and use. See the terms.
The prompt
Continue building the complete 3-device charging station using the existing MagSafe Puck Holder Duo. Preserve its geometry. Add a matching MagSafe holder for the iPhone 16 Pro Max, a smaller Apple Watch Series 6 charging puck holder, and a premium sculpted base. Arrange left to right: Apple Watch, iPhone 16 Pro Max, iPhone Duo. Position both phone mounts at 70 degrees above horizontal. Add reinforced support arms, a fixed phone support lip for the 16 Pro Max, and removable interchangeable support lips for the Duo. Allow the Duo to charge folded or unfolded, portrait or landscape, with enough spacing to avoid collisions with the other phone. Add underside cable channels, a hidden metal ballast compartment, and rounded minimalist surfaces. Use modular PETG parts sized for a Bambu X1C, with M3 screw connections. Keep every part as a nonempty, watertight printable solid. Generate the entire assembly, not just the puck holders. Preserve existing components and add the missing parts.
Parameters
| Name | Value | Range |
|---|---|---|
| Apple MagSafe puck diameter | 55.9 mm | 50 – 60 |
| Radial sliding clearance | 0.35 mm | 0.1 – 0.8 |
| Side wall thickness | 3 mm | 3 – 8 |
| Backplate thickness | 3 mm | 3 – 8 |
| Recess depth, less than total height | 6 mm | 5.6 – 8 |
| Cable exit notch width | 8 mm | 4 – 16 |
| Cable exit notch height from top | 5 mm | 2 – 5 |
| Central M3 clearance hole | 3.4 mm | 3 – 6 |
| Base width | 340 mm | 260 – 420 |
| Base depth | 140 mm | 110 – 200 |
| Base height | 28 mm | 20 – 40 |
| Apple Watch station X | -120 mm | -200 – 200 |
| iPhone 16 Pro Max station X | 0 mm | -200 – 200 |
| MagSafe Duo station X | 120 mm | -200 – 200 |
| Phone backrest angle from horizontal | 70 deg | 50 – 85 |
| Sloped phone face front Y | -25.48 mm | -40 – 0 |
| Sloped phone face top back Y | 0 mm | -20 – 20 |
| Apple Watch puck diameter | 43.2 mm | 35 – 55 |
| Watch puck radial clearance | 0.35 mm | 0.1 – 0.8 |
| Watch holder side wall | 2.5 mm | 2.5 – 6 |
| Watch holder backplate | 3 mm | 3 – 6 |
| Watch recess depth | 4.2 mm | 3 – 6 |
| Watch cable notch width | 7 mm | 4 – 12 |
| Watch cable notch height | 4 mm | 2 – 5 |
| Watch holder M3 hole | 3.4 mm | 3 – 6 |
| iPhone holder width across X | 84 mm | 60 – 120 |
| iPhone holder base depth | 56 mm | 40 – 90 |
| iPhone base plate height | 6 mm | 4 – 10 |
| iPhone support lip width | 72 mm | 50 – 110 |
| iPhone support lip depth | 18 mm | 8 – 30 |
| iPhone support lip height | 8 mm | 4 – 16 |
| Duo support arm width | 84 mm | 60 – 120 |
| Duo support arm base depth | 56 mm | 40 – 90 |
| Duo base plate height | 6 mm | 4 – 10 |
| Duo removable lip width | 72 mm | 50 – 110 |
| Duo removable lip depth | 18 mm | 8 – 30 |
| Duo removable lip height | 8 mm | 4 – 16 |
| Underside cable channel width | 9 mm | 5 – 16 |
| Underside cable channel depth | 3.5 mm | 2 – 6 |
| Ballast wall margin from base edges | 12 mm | 8 – 25 |
| Hidden ballast compartment height | 12 mm | 6 – 20 |
| Ballast lid thickness | 5 mm | 3 – 8 |
| M3 screw clearance diameter | 3.4 mm | 3 – 6 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o